Adds the decision half of the app updater. Detection (P2) and the
snapshot-first apply/revert (P3) were already real, but nothing ever
pressed the button — every update waited for a click.
CFG_<APP>_UPDATE_TYPE=auto|manual per app, default auto (33 templates)
CFG_UPDATER_AUTO=true|false master switch, default true
updaterAppPolicy resolves the two the way backupResolveStrategy already
resolves backup strategy: the global switch can only make things more
manual. updaterApplyAuto runs at the end of `updater check` and enqueues
the ordinary updater_apply task for each auto app that has an update —
never applies inline, so an automatic update is the same code path, task
log, History entry and Roll back button as a manual one.
Safety: each attempt stamps its target digest under generated/auto/, so a
build that fails is rolled back and then left alone rather than retried on
every scan; in-flight updater tasks are skipped so scans can't stack.
Tracked end to end: updates.json carries each app's resolved update_type,
History entries carry trigger=manual|auto. The WebUI says whether updates
install themselves, chips only the apps that opted out, labels automatic
history, and — since an auto app's pending update needs no decision — keeps
it off the Overview board's "Needs action" view.
Also fixes artifactApplyAuto enqueueing without --detach: it runs inside
the single-threaded task processor's own poll, so following the new task in
the foreground waits for a task that cannot start until it returns.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The board landed on "Everything", so the rows that want a decision were
mixed in with the healthy one-liners on arrival. Default to the "Needs
action" chip instead, falling back to "Everything" when nothing is
pending (that view would otherwise be empty). An explicit chip click
still sticks for the session.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Consistency pass across the App Center Overview area: no tab has a top-level
manual "Check" button anymore — scans are automatic.
- Overview tab: remove the header "Check now"; the hero already reports last-scan
time, and the unscanned sub-copy no longer points at a button that's gone.
- Improvements tab: remove the header "Check"; lead its body with the same
auto-check line (right-side Check-now nudge) as the Updates tab.
- Remove the now-unused checkBtn helper.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Extends the per-app Updates treatment to the fleet App Center → Overview →
Updates list, and folds the manual check into the status line so it's the one
canonical (secondary) affordance rather than a top-level tab button:
- updater-page.js: renderAutoCheckLine() now ends with a right-aligned "↻ Check
now" button (data-updater-action="check" — both surfaces already wire it).
- overview-manager.js: drop the "Check"/"Check now" button from the Updates tab
header (keep "Update all", only when updates exist); lead renderUpdates() with
the auto-check line.
- overview.css: .updater-autocheck wraps on narrow widths; .updater-autocheck-btn
sits right (margin-left:auto), smaller.
- app-tabbed-manager.js: friendlier no-data copy ("You're all caught up — no
updates found for this app.").
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The expanded-row deep-link pushed /overview/<tab>?app=<app> — wrong prefix
and a ?query the SPA's path-based router drops on a cold load, so the row
never reopened from a shared URL. Switch to /apps/overview/updates/<app>,
matching the Migrate/Backups sub-tab path pattern, and parse the app from
that path segment in _honorAppDeepLink so the row expands on cold load too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Redesign the Fleet Overview Updates list rows to match the Tasks page:
each app now shows its icon tile, a status pill ('✓ Up to date' /
'↑ Update available' / '• Unscanned'), and a dedicated 'Details' toggle
button (chevron) in the row actions instead of the bare leading chevron.
Resolve the app icon from the slug (/core/icons/apps/<slug>.svg, hidden on
error) and prefer window.getAppDisplayName for a prettier title.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Trivy runs as a server whose vulnerability DB downloads on first boot; until it
lands no scan can produce results. Previously the updater generator wrote an
empty-but-valid cves.json the moment the file was missing, so installing Trivy
painted a green "no known vulnerabilities" all-clear that was actually a lie —
the DB hadn't even downloaded, and the Updates/Security view gave no signal.
Add an honest scanner state the WebUI branches on:
- containers/trivy/scripts/trivy_scan.sh — trivyScannerState (absent |
db_updating | ready) via `trivy version -f json`, trivyDbUpdatedAt, and
trivyScanImageCves (per-image scan normalized to {id,severity,package,
installed,fixed_in,url}, deduped). All degrade safely on error.
- webui_updater_scan.sh — stamp cves.json with scanner.state; only run real
per-image scans once the DB is ready. Always rewritten so state tracks live.
- updater-page.js — Security tab shows a loading box while the DB updates, an
install nudge when absent, and the genuine 🎉 only when ready+empty; Overview
CVE card sub + hint reflect the state.
- overview-manager.js — fleet Security row surfaces the "building CVE database"
pending state instead of silently omitting.
- function_manifest.sh — regenerated for the new trivy_scan.sh functions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
With no apps tracked the sub line read '0 apps tracked · 0/0 backed up ·
last scan …' — pure noise. Show only the scan time in that case.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The embedded backup center deep-links *in* fine (mountBackupCenter parses the
sub-segment), but clicking a sub-tab never wrote the URL: BackupPage disables
pushTabToUrl() when embedded and nothing on the fleet side stepped in, so the
address bar stayed stale and the sub-tabs weren't shareable/deep-linkable —
unlike the sibling Migrate sub-tabs.
Give BackupPage an onTabChange hook fired on every switch; the OverviewManager
supplies it to replaceState /apps/overview/backups/<sub> (replaceState, matching
Migrate, so the on-entry deep-link re-sync can't stack a duplicate history
entry). Standalone /backup keeps using pushTabToUrl() unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Switching to the fleet Backups tab blanked the whole pane to a bare, headerless
lpLoadingBox() while the (script-heavy) backup center loaded, so it read as the
entire section reloading with no indication of where you'd landed — then the
header + content appeared at once when the fetch resolved.
Render the shared .ov-tab-header (💾 Backups + description + divider) up front and
drop the spinner into an .ov-tab-body beneath it, matching the per-app detail
tabs' header-first idiom (and the recent Admin board fix). The header stays put
and only the content area swaps in once BackupPage mounts.
The Migrate tab already does this — mountMigrate() injects its header and the
sub-tab strip is static, so its spinner is already confined to the Restore/Peers
sub-panel — so no change was needed there.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
- .tabs-list now rounds its own top corners (12px, matching .tab-navigation);
the first/last .tab-button radii were invisible against the bar's square
background on the Backups/Migrate/Config sub-tab strips.
- All five fleet tabs share one rhythm under the header divider: a single
16px gap, no extra inset — .ov-tab-body drops its recessed margin/padding
box, and the Backups/Migrate sub-tab strips gain the matching gap.
- The Peers list keeps its recessed panel via .peers-body (in-card recipe),
no longer riding the flattened .ov-tab-body.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The embedded backup center's fragment kept its standalone-page skeleton
(.container + .sidebar restyled by a pile of overview.css overrides).
.container's fixed viewport height inflated the Backups tab pane to
~100vh, stretching the pane surface far past the content and under the
footer buttons, and the restyled strip never matched the app-detail
Config sub-tabs.
Rebuild backup-content.html on the canonical sub-tab idiom instead —
.tabs-wrapper > .tabs-list (emoji tab-buttons) + .tabs-content card,
with a .backup-actions footer below the card mirroring .config-actions.
The bespoke overview.css restyle block, the nebula special-cases, the
embed's id-stripping and BackupPage's dead page-header updater all fall
away; the export menu now opens upward from the footer.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Pages and panels showed inconsistent loading states: the Backup center
and several admin pages (System, SSH, admin Overview), the Overview
Migrate/Peers panels, the per-app updater section and the backup engine
details modal rendered a bare 'Loading…' text line (updater-empty /
backup-empty-state) with no spinner, while Services/Config/Tasks used a
boxed card + spinner.
Add one shared loader — window.lpLoadingBox(message) + .lp-loading CSS in
the core/loading subsystem (the boxed card + accent spinner the good tabs
already use) — and route those bare-text loaders through it. The system
metric graph keeps its absolute overlay but gains the same spinner.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The fleet Overview area (Overview/Updates/Improvements/Backups/Migrate) now
lives at /apps/overview* instead of /overview*, reflecting that it belongs to
App Center. The Backups tab is therefore /apps/overview/backups, and the old
standalone Backup Center page is removed entirely:
- apps feature owns /apps/overview* (covered by the existing /apps* route); its
mount() dispatches /apps/overview -> fleet Overview before the grid check.
- _legacyRedirect() rewrites old short URLs so bookmarks/links keep working and
the address bar shows the canonical path:
/overview[/tab] -> /apps/overview[/tab]
/backup[/sub] -> /apps/overview/backups[/sub]
/updater, /peers redirects retargeted to /apps/overview*
- Removed the standalone backup feature: components/backup/{index.js,feature.json},
its manifest entry, the /backup route registrations and the dead handleBackup().
The BackupPage classes stay — the Overview Backups tab embeds them.
- Repointed every backups/overview link: the admin dashboard's 'Open backup
center', the app-card 'Open backup center' button + snapshot-overflow link,
the sidebar Overview entry, the improvements deep-link, and the Migrate
'go to locations' deep-link.
Also drop the redundant inline Check button from the Security empty state
(same rationale as Improvements: the host auto-scan repopulates it and the
header carries a manual Check).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Replace the stat-tile grid with a needs-attention board: a health hero on
top (one big status circle — green all-clear / amber something-to-do /
neutral pre-scan — matching the admin dashboard's dot language) over one
status row per area (updates, security, improvements, backups). Rows that
want a decision are tinted with their area hue and carry their action
buttons inline (Review / Update all / Open Backups); healthy areas
collapse to a quiet neutral one-liner. An Everything / Needs action chip
pair filters the board down to just the actionable rows.
Board rows deep-link with intent: Security lands on the Updates tab
pre-filtered to the affected apps via a new data-filter hop on the goto
action. backupSummary() now splits never-backed-up from week-stale apps
so the backup row can say which it is.
Signed-off-by: librelad <librelad@digitalangels.vip>
Replace the click-to-scan-only flow with a self-throttled auto-scan that
rides the existing task-processor idle poll (the same shape as the
network-drift check — no new daemon, unit, or endpoint):
- 'libreportal updater check auto' gates on the age of the generated
updates.json vs CFG_UPDATER_SCAN_INTERVAL (minutes, default 30,
0 disables); a fresh file makes the 60s tick a single stat() + return.
Manual checks and post-update rescans reset the clock for free, and a
missing file means the first scan runs ~a minute after install.
- Eligible signed hotfixes keep flowing through artifactApplyAuto, which
only enqueues ordinary tasks — mutations stay on the task path.
- Open updater surfaces (standalone /updater and the fleet Overview's
headless UpdaterPage) follow along with a 60s static-JSON re-read that
repaints only when a generated_at stamp changed; timer released via
dispose() on unmount, ticks skipped while hidden.
- Empty states now say the first scan happens automatically; Check now
stays as the immediate manual override.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Every fleet Overview tab now follows the per-app detail tab idiom the
rest of the app uses: title + description on the left, action buttons
on the right, a divider underneath, and the body inside the recessed
dark container (.tasks-container recipe).
- renderHeader() gains an action slot; Check/Check now/Update all move
out of in-body toolbars into the header (Updates keeps its filter
chips in the body; the Apps-tracked stat card drops its duplicate
Check button; UpdaterPage.renderImprovements can skip its toolbar).
- String tabs wrap their body in .ov-tab-body — margin/padding 16px,
rgba(bg,.2) panel — mirroring backup/tasks/updater containers.
- The Backups tab's embedded nested strip (Dashboard/Backups/Locations/
Configuration) now sits on the same surface as every other tab strip:
added to the nebula sidebar-bg anchor rule (it was stuck on the
lighter --hover-bg) and its buttons use .main-tab-button type.
Signed-off-by: librelad <librelad@digitalangels.vip>
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Migrate and Backups detached their sub-tab strip from the content (16px gap)
and Backups had no top-level header and a transparent (card-less) body — so
both read as different from the per-app Config sub-tabs.
- Migrate: nest .tabs-content inside the same .tabs-wrapper as .tabs-list (the
canonical app-detail structure) and drop the gap, so the strip joins the
content card with no space and clean corners.
- Backups: inject the shared "Backups" .config-title header above the embedded
BackupPage; drop the sub-tab strip's bottom gap; give the content (.main) the
connected .tabs-content surface (card bg + rounded bottom) and round the
strip's outer top corners — so it reads as one tabs-within-tabs unit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Drop the floating fleet header; every Overview tab now renders its heading
inside the pane, under the tab strip, in the per-app detail .config-title
format (emoji + title + description) — matching the Migrate tab.
Introduces a small modular system so the area can't drift:
- OV_TAB_META is the single source of truth for each tab's icon/title/blurb.
- renderHeader(id) is the only thing that turns it into markup; renderTab()
prepends it for the string tabs and mountMigrate() injects it once for the
static Migrate pane. Body renderers now only ever produce the body.
Retires the now-dead floating-header plumbing: updateHeader(), the
ov-backups-active/ov-migrate-active hide toggles + CSS, and the .overview-header
rules. The tabbed interface owns the top padding the header used to provide.
Backups is the documented exception — it embeds the full BackupPage, which
supplies its own header.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Give the fleet Overview › Migrate tab the same in-content header + sub-tab
styling the per-app detail tabs use:
- Add a .config-title header (icon + title + description) inside the Migrate
pane, above the Restore/Peers sub-tabs, and hide the generic floating fleet
header for Migrate (mirrors how Backups already supplies its own heading).
- Make the .tab-button icon↔label gap explicit (flex + 6px gap) so sub-tabs
render identically whether or not the markup has whitespace between the
emoji and name spans; align the Backups sub-tab strip gap to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Restore empty-state 'Open Locations' now deep-links to the backup center's
Locations sub-tab: the embedded center honors /overview/backups/<sub> and
switchTab()s to it after mount (was landing on Dashboard).
- PeersPage.notify + MigratePage.notify use the real window.notificationSystem
(were calling a never-defined window.showNotification → console-only).
- Remove the now-dead Admin config-manager peers branch (Peers left Admin).
- Trim the dead migrate.json/peers fetch + hostnameToPeerName from BackupPage
(no consumer after the migrate removal).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The embedded backup center's lazy bundle still listed backup-migrate.js, which
was just removed — its 404 failed the whole load chain. Drop it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New 5th Overview tab 'Migrate' with a nested segmented sub-tab row reusing the
per-app Config-tab .tabs-list/.tab-button design:
- Restore: a standalone MigratePage (cross-host migrate moved out of BackupPage
into its own controller + fragment + modal; own data fetch + task dispatch).
- Peers: reuses the existing PeersPage (container-parameterized) + its template.
Both lazy-loaded on first open and disposed on apps-feature unmount. Additive —
migrate is still in the backup center and Peers still in Admin until the next
commits remove the duplicates.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- BackupPage task-refresh run-guard is instance-relative now (window.backupPage
OR window.overviewBackupPage), so the embedded center's own auto-refresh works
instead of relying on OverviewManager's overlapping coverage.
- _ensureBackupAssets no longer memoizes a rejected promise — a transient
script-load failure no longer bricks the backup center until reload; the next
open retries.
- spaClean.loadScript removes the failed <script> element on error so the
getElementById dedupe can't make a retry resolve without re-fetching.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The 'already mounted?' guard checked #backup-section, but the per-app Backups
tab also defines that id — detect the prior mount via the pane's own
.backup-layout instead so the check is correct, not coincidental.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Instead of a glance + 'Open backup center' button, the Backups tab now mounts
the real BackupPage (dashboard/snapshots/locations/migrate/configuration) inline,
with its sidebar restyled as a nested tab strip and its own header taking over.
- BackupPage gains an embedded mode (opts.embedded): no /backup URL coupling, so
sub-tabs switch in-page under /overview/backups. Backward compatible.
- OverviewManager lazy-loads the backup bundle + fragment on first open, news a
BackupPage({embedded:true}), and disposes it on apps-feature unmount. Colliding
ids (#sidebar/#mobile-overlay) are stripped on inject.
- Revert the Admin backup-config surface — the embedded center (incl.
Configuration) is now the single home for backup settings.
- The updater needs no equivalent: its sections were already unpacked into the
Overview/Updates/Improvements tabs + the per-row expander.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- HIGH: renderAppDetail gated the Roll back button on last_snapshot* fields no
generator emits, so it never rendered. Derive recoverability from update
history (updater_apply always snapshots first) so the affordance is reachable.
- MED: per-app Updates tab now repaints on update/rollback/check/hotfix task
completion (mirrors the backups card) instead of going stale until re-click.
- MED: in-page tab switches now sync spaClean.currentRoute, so the sidebar
Overview entry no longer no-ops after switching tabs.
- LOW: keyboard activation (Enter/Space) for the role=button expander heads,
backup tiles, and sidebar Overview entry.
- LOW: preserve ALL expanded Updates rows across a background repaint, not just
the single ?app= deep-link (split toggle into _openDetail/_closeDetail).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Open the per-app row named by ?app=<name> on load/repaint and write it back on
toggle, so an expanded Updates row is a shareable URL — mirrors the Tasks page's
?task=<id> pattern.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce a per-fleet Overview area inside the apps shell, reachable from a new
'Overview' entry pinned above the apps sidebar search. Selecting it renders a
top-tabbed view in the main pane — Overview · Updates · Improvements · Backups —
mirroring the per-app tabbed layout, with the apps sidebar persistent.
- TabController: generic root-scoped show/hide tab host (core/ui-state).
- OverviewManager: drives the 4 tabs. Reuses a headless UpdaterPage for all
update/CVE/improvement data + rendering (its renderX() are pure HTML
producers) and reads backup/dashboard.json directly for backup health.
- Overview tab: combined update + backup health cards.
- Updates tab: per-app expander table (CVEs/recovery/history inline via the new
UpdaterPage.renderAppDetail) + All/Updates/Security filter chips.
- Improvements tab: reuses the updater's signed-hotfix renderer.
- Backups tab: fleet backup-health tiles; actions deep-link per app.
- Additive only: /overview* routes on the apps feature; old /updater and
/backup pages untouched. Cleanup (redirects, nav, Admin config move) is next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
