First real end-to-end auto-update on a live install failed like this:
Automatically updating trivy (a recovery snapshot is taken first)
Snapshotting trivy before update…
Pulling new image(s) for …
Update of failed — rolling back…
Could not roll back automatically
The app name went empty after the snapshot. Cause: bash is dynamically
scoped, so a callee assigning an undeclared variable writes the CALLER's
local of that name — and a `while read app` loop leaves it EMPTY at EOF.
webuiBackupAppStatus's dashboard generator runs at the end of every backup
and did exactly that to updaterApplyApp's `app`.
Nothing was damaged: the pull ran against an empty name, failed before
touching the image, and the rollback was a no-op on a nonexistent app.
Fixed both ends. The generator (and three gluetun loops with the same
latent leak) now declare `local app`. updaterApplyApp/updaterRollbackApp
hold the name in `_upd_app` so they no longer depend on every callee's
hygiene, and updaterApplyAll stops leaking its own loop var.
This is exactly the untested path the roadmap flagged: "apply/revert not
yet exercised end-to-end on a live install with a pending update."
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds the decision half of the app updater. Detection (P2) and the
snapshot-first apply/revert (P3) were already real, but nothing ever
pressed the button — every update waited for a click.
CFG_<APP>_UPDATE_TYPE=auto|manual per app, default auto (33 templates)
CFG_UPDATER_AUTO=true|false master switch, default true
updaterAppPolicy resolves the two the way backupResolveStrategy already
resolves backup strategy: the global switch can only make things more
manual. updaterApplyAuto runs at the end of `updater check` and enqueues
the ordinary updater_apply task for each auto app that has an update —
never applies inline, so an automatic update is the same code path, task
log, History entry and Roll back button as a manual one.
Safety: each attempt stamps its target digest under generated/auto/, so a
build that fails is rolled back and then left alone rather than retried on
every scan; in-flight updater tasks are skipped so scans can't stack.
Tracked end to end: updates.json carries each app's resolved update_type,
History entries carry trigger=manual|auto. The WebUI says whether updates
install themselves, chips only the apps that opted out, labels automatic
history, and — since an auto app's pending update needs no decision — keeps
it off the Overview board's "Needs action" view.
Also fixes artifactApplyAuto enqueueing without --detach: it runs inside
the single-threaded task processor's own poll, so following the new task in
the foreground waits for a task that cannot start until it returns.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The board landed on "Everything", so the rows that want a decision were
mixed in with the healthy one-liners on arrival. Default to the "Needs
action" chip instead, falling back to "Everything" when nothing is
pending (that view would otherwise be empty). An explicit chip click
still sticks for the session.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Cut the 36-word blurb to 23 without losing either fact that matters: it's
DNS-based, and blocked domains resolve to a local blackhole.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tags and Paths were stacked full-width blocks, so a single tag chip and a
single path each burned a whole row and left the panel mostly empty. Wrap
them in a .bsm-blocks auto-fit grid that seats them side by side and falls
back to stacking under ~460px. The wrapper now owns the divider, so it
renders once for the pair instead of once per block, and is omitted
entirely when neither block has content.
Applied to both renderers of this markup: the global Backups view and the
per-app backup card.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The App Center blurb ran three sentences, two of which restated things
the Security view already makes obvious. Keep the what, drop the rest.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
sudo-rs — the default sudo from Ubuntu 25.10, so on 26.04 — does not
implement bare -E. It does not reject it either: it warns to stderr
("preserving the entire environment is not supported, '-E' is ignored")
and runs the command with the environment DROPPED, leaving the exit
status untouched. Callers capture stderr, so the warning is invisible and
the backup engines simply never receive RESTIC_PASSWORD / BORG_PASSPHRASE
/ KOPIA_PASSWORD and cannot open the repository.
Name the nine vars explicitly via --preserve-env=<list>, which sudo-rs
and classic sudo (>=1.8.21, so Debian 10's 1.8.27) both honour, so this
needs no version gate. The list is cross-checked against every
RESTIC_/BORG_/KOPIA_ var the engine env scripts export.
The list lives in variables.sh with a literal fallback in runBackupOp,
because init.sh sources run_privileged.sh directly during install without
ever loading variables.sh — an unguarded empty list would silently
reproduce the same dropped-credential bug.
restoreFirstRunDiscover now goes through runBackupOp rather than issuing
its own sudo. It was the only backup-engine call bypassing that funnel,
which is why it missed this fix by construction; routing it back also
gives it the -H that keeps restic's cache under the backup user's HOME.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
get.docker.com/rootless aborts when ip_tables/ip6_tables aren't loaded.
Ubuntu 24.04 and 26.04 ship both modules but don't autoload them on a
fresh box, so rootless setup died there — and because the caller captures
its output into $result, the reason never reached the console or the
error report. The install continued, reported success, and printed
credentials for a WebUI that was never running.
initPrerequires now modprobes both modules and persists them to
/etc/modules-load.d/libreportal-rootless.conf for subsequent boots,
failing with an actionable message when the kernel genuinely lacks them
(container/VM kernels without netfilter).
installDockerRootless gets its own guard, since it also runs outside
init.sh via start_docker / rootless_start_setup. It only attempts
modprobe when it can — the de-sudoed manager has no modprobe in the
LP_SYSTEM allowlist, matching how ubuntu.sh handles sudo-apt — and
returns non-zero rather than proceeding into a failure whose message
would be swallowed. Already-loaded modules are a clean no-op, so the
normal post-install re-run path is unaffected.
Uninstall removes the drop-in alongside the sysctl ones, and it's listed
in the footprint summary.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`apt install p7zip*` only still resolves on Debian 13 / Ubuntu 24.04+
because the renamed `7zip` package happens to declare `Provides: p7zip`.
That is an alias we don't control, so pick the real package name against
the freshly-updated lists instead: `7zip` where it exists, `p7zip-full`
otherwise. Match on a real package stanza rather than apt-cache's exit
status, which returns 0 with empty output for provided-only names.
Also in this path:
- apt -> apt-get for the scripted calls, so the "apt does not have a
stable CLI interface" warning stops polluting the captured $result.
- drop a duplicated `pv` from the package list.
- move the package list below `apt-get update` so the 7-Zip probe reads
current lists.
Debian 10 sysctl check now reads OS_TYPE/OS_VERSION from detectOS rather
than shelling out to lsb_release, which minimal images don't ship. This
also stops a non-Debian release numbered "10" from matching.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
24.04 is the current LTS and was still hitting the untested-OS prompt
while the newer 26.04 did not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Ubuntu 26.04 hit the "untested and may not be fully supported" prompt
and blocked non-interactive installs. Add it to the supported list.
Also escape the dots in the version alternation — unescaped they matched
any character, so e.g. "18X04" was treated as a tested release.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A fresh install creates an empty containers root but leaves the rootless
daemon's own container state untouched. Restarting the daemon then runs its
container-restore pass, which resurrects the previous install's containers —
and Docker materialises each missing bind-mount source first, creating an empty
DIRECTORY even where the mount is a file.
That is the trigger behind the <app>.config stub directories: at 19:38:59 the
daemon re-created every missing mount source for a container built 40 minutes
earlier, runc then failed with "not a directory: Are you trying to mount a
directory onto a file", and the abandoned stubs collided with the install's own
copies 18 seconds later.
Add dockerRemoveStrandedContainers, run right after the rootless daemon
restart: remove containers whose compose project directory no longer exists, so
the next restart has nothing to resurrect. Scoped to project directories under
the LibrePortal containers root, so unrelated containers on the host are never
touched, and gated on the daemon answering.
Signed-off-by: librelad <librelad@digitalangels.vip>
Docker materialises a missing bind-mount source as an empty directory when a
container starts. The WebUI compose mounts ./libreportal.config as a file, so a
container start before the config landed left a directory at that path — and it
was self-perpetuating:
- copyFolder's tar extract aborted the whole source copy with
"libreportal/libreportal.config: Cannot open: File exists" (exit 2)
- dockerConfigSetupToContainer guards on [ ! -f ], which a directory fails, so
copyFile dropped the real config INSIDE the stub
- the closing -e / -r sanity checks both pass on a directory
The installer then reported success while libreportal-service crash-looped on
EISDIR reading /app/libreportal.config, leaving the WebUI unreachable.
Add repairStubDirForFile: promote a same-named file out of the stub, drop the
directory, and report if the path still isn't a regular file. Call it before the
WebUI source copy and before the per-app config copy (covers every app, not just
the WebUI), and tighten the closing existence check from -e to -f so a stub can
never pass validation again.
Signed-off-by: librelad <librelad@digitalangels.vip>
The Security triage implied 'fix available · update the app to clear these'
even when the app was already on the newest image — where updating does
nothing and the patch only lands when the maintainer rebuilds. That read as a
false to-do. Reframe honestly:
- Status line keyed on update_available, not Trivy's fixed_in: up to date =>
'nothing to apply; clears when the maintainer ships a rebuilt image'; update
available => 'updating may pull in patched packages'.
- Groups relabeled to describe reality: 'Patch released upstream' (hint: lands
on rebuild / may be cleared by updating) and 'No patch yet'. Counts go
neutral so a big number doesn't read as either alarm or all-clear.
- Row 'no fix yet' -> 'no patch'; use getAppDisplayName so it's 'Trivy' not
'trivy'.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Consistency pass across the App Center Overview area: no tab has a top-level
manual "Check" button anymore — scans are automatic.
- Overview tab: remove the header "Check now"; the hero already reports last-scan
time, and the unscanned sub-copy no longer points at a button that's gone.
- Improvements tab: remove the header "Check"; lead its body with the same
auto-check line (right-side Check-now nudge) as the Updates tab.
- Remove the now-unused checkBtn helper.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A user rightly noted the Security section read as a wall of unrelated
dependency CVEs against an 'Up to date' app — no cue for what, if anything,
to do. Make it answer 'is this my problem, and will updating fix it?':
- Scanner (trivy_scan.sh): stop discarding Trivy's Class/Type/Status at the
jq flatten — bind them onto each vuln so the UI can tell an OS package from
the app's own bundled dependency, and a real fix from a won't-fix.
- Security section (updater-page.js): explain these are vulnerabilities in the
packages bundled in the image (not the app version), tally 'N with a fix ·
M no fix yet', then split the list into a 'Fix available' group (worst-first,
each row tagged OS/dependency and showing installed -> fixed) and a dimmed
'No fix yet' group. No fabricated 'this update fixes N' claim — fixed_in vs
the image tag isn't a reliable join, so we only state fix availability.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Extends the per-app Updates treatment to the fleet App Center → Overview →
Updates list, and folds the manual check into the status line so it's the one
canonical (secondary) affordance rather than a top-level tab button:
- updater-page.js: renderAutoCheckLine() now ends with a right-aligned "↻ Check
now" button (data-updater-action="check" — both surfaces already wire it).
- overview-manager.js: drop the "Check"/"Check now" button from the Updates tab
header (keep "Update all", only when updates exist); lead renderUpdates() with
the auto-check line.
- overview.css: .updater-autocheck wraps on narrow widths; .updater-autocheck-btn
sits right (margin-left:auto), smaller.
- app-tabbed-manager.js: friendlier no-data copy ("You're all caught up — no
updates found for this app.").
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The per-app Updates tab pushed a manual "Check" button (header + empty state)
even though scans run automatically on CFG_UPDATER_SCAN_INTERVAL — so an app with
nothing to update read like an empty/actionable page. Replace the manual Check
with a calm status line inside the panel: "Checked automatically · last checked X
· next check ~Y", backup-schedule style. The genuine Apply/Roll back actions stay
(applying is still manual and safe). No auto-apply.
- webui_updater_scan.sh: stamp scan_interval_minutes alongside generated_at in
updates.json so the display needs no separate config fetch (0 = auto off).
- updater-page.js: renderAutoCheckLine() + fmtRelFuture().
- app-tabbed-manager.js: drop the header/empty-state Check buttons; render the
auto-check line; friendlier no-data copy.
- overview.css: style .updater-autocheck (green dot live / muted when off).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The expanded-row deep-link pushed /overview/<tab>?app=<app> — wrong prefix
and a ?query the SPA's path-based router drops on a cold load, so the row
never reopened from a shared URL. Switch to /apps/overview/updates/<app>,
matching the Migrate/Backups sub-tab path pattern, and parse the app from
that path segment in _honorAppDeepLink so the row expands on cold load too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Security section in the per-app detail panel dropped the CVE list flush
against the panel edges (no side padding, no visible frame). Wrap it in an
inset dark rounded .updater-cve-box (side padding + border) so it reads as a
contained block matching the app rows, and make the scroll thumb more present
(wider, higher-contrast, padded track) so a long list clearly scrolls.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Reduce .ov-row-head vertical padding (12px -> 5px) and shrink the app icon
tile (32px -> 24px) so each Updates row is roughly half as tall.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Redesign the Fleet Overview Updates list rows to match the Tasks page:
each app now shows its icon tile, a status pill ('✓ Up to date' /
'↑ Update available' / '• Unscanned'), and a dedicated 'Details' toggle
button (chevron) in the row actions instead of the bare leading chevron.
Resolve the app icon from the slug (/core/icons/apps/<slug>.svg, hidden on
error) and prefer window.getAppDisplayName for a prettier title.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The task-log "Loading logs..." state rendered as a bare left-aligned text
line (or a tiny ad-hoc 16px spinner overlay), which read as unfinished next
to the rest of the UI. Swap all three log-loading spots (initial placeholder,
toggle-open fetch, running-task stream placeholder) to the canonical
window.lpLoadingBox('Loading logs…'), and scope .lp-loading inside the log
terminal box to fill it and drop its own card chrome so the spinner sits dead
centre over the terminal surface instead of a box-in-a-box. Widen the stream
overlay-removal selector to also clear .lp-loading.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The per-app Updates tab's recessed panel used padding: 4px 16px, so the first
section (VERSION) sat 4px from the top edge — looking unpadded — while the last
section ended 20px from the bottom. Match the sibling .backup-snapshots-container
idiom (uniform 16px) and zero the first/last sections' outer padding so the
container's inset sets an even top/bottom margin.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For a generic app (no traefik files, not libreportal) fixPermissionsBeforeStart
prints nothing, so the "Updating file permissions before starting" step showed
its header followed by an empty line — looking like it did nothing. Add an
isSuccessful line after the call so the step reports like every other one.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A fresh install ran webuiLibrePortalUpdate twice back-to-back: once in
installLibrePortal step 11, then again in startScan at the end of preinstall.
The 30s time-debounce meant to collapse them is fragile (it never fired on a
recent install — >30s elapsed between the two), and debouncing is the wrong
lever anyway: startScan's pass runs AFTER scanConfigsForRandomPassword
finalises app passwords, so it — not the step-11 pass — is authoritative.
Defer the step-11 generation deterministically during a bootstrap install
(libreportal_bootstrap_install=true), leaving startScan's single pass to do the
work. Standalone reinstalls (no bootstrap flag) still generate in step 11. The
time-debounce stays as a general back-to-back backstop.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The authoritative icon source containers/trivy/trivy.svg held a generic
hand-drawn shield/magnifier placeholder, while the frontend copy had the
official brand mark. The icon sync (webuiSyncAppIcons) treats the source as
canonical, so it was clobbering the official logo with the placeholder on
every full WebUI update/install — leaving the setup wizard's app tile
showing the generic icon. Replace the source with the official logo so it
sticks.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
P0 anchor, P1 config-first pin, P2 registry detection + display, and P3 honest
pinned apply/revert are all built and deployed. Records the detection nuance
(digest-compare fully covers rolling apps; versioned newer-version enumeration
is a P5 add) and the remaining deferred work.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Make the Update / Roll-back buttons tell the truth, closing the "new code on
old data" hole a floating tag creates.
updaterApplyApp:
- Anchor-correct: capture before/after from updaterPrimaryImage (the
<slug>-service image), not `grep -m1 image:` — fixes ollama et al.
- Records EXACT build refs in history from->to: repo:tag@sha256:<digest>
(via updaterRefDigest), so history is meaningful even when the tag doesn't
move (a rebuilt `latest`).
- Un-pins any digest a prior rollback pinned before pulling, so Update tracks
the channel again instead of freezing on the rolled-back build.
updaterRollbackApp:
- Before recreating, re-pins the anchor image to the pre-update build's digest
(from history's last update/ok `from`) via updaterSetAnchorRef, so `up` runs
the OLD code — not the current channel head. This is the fix for restoring a
data snapshot but recreating on a newer image.
New helpers (cli_updater_commands.sh): updaterRefDigest (local RepoDigest),
updaterSetAnchorRef (rewrite the anchor image line by service name, preserving
indent + the version sentinel; correct for companion-first apps like ollama),
updaterLastUpdateFrom (roll-back target from history).
Verified the helpers on nextcloud + ollama: pin adds @sha256 to the right
anchor only, sidecars untouched, sentinel preserved, unpin restores, YAML valid.
Caught and fixed a `local a=$1 b=...$a...` same-statement expansion bug that
would have silently no-op'd the rollback pin. End-to-end apply/revert not
exercised live here (no installed app has a pending update on this box).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Trivy had no /core/icons/apps/trivy.svg (the canonical app-icon path used by
task rows, tiles, tools, services, routing), so it fell back to the default.
Add the official Trivy mark, white on its #1904DA brand tile so it stays legible
on the dark, near-transparent icon tiles across every theme.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
