Two webui-data generators wrote to a temp file via bare `cat > "$temp_file"`
then `runFileOp mv` to the final path. The temp file's path sits inside
$containers_dir/libreportal/frontend/data/<x>/generated/ — owned by the
dockerinstall user (the data plane). The generators run as the manager,
who can't open paths under that tree for write, so every WebUI update
hit:
webui_backup_migrate.sh: line 125: …/migrate.json.tmp.<pid>: Permission denied
mv: cannot stat '…/migrate.json.tmp.<pid>': No such file or directory
webui_peers.sh: line 23: …/peers.json.tmp.<pid>: Permission denied
mv: cannot stat '…/peers.json.tmp.<pid>': No such file or directory
Pipe the heredoc through `runFileWrite "$output_file"` instead — same
shape the 5 sibling generators in this dir (backup_app_status,
backup_locations, backup_passwords, backup_snapshots, backup_dashboard)
already use. runFileWrite routes the write via the install user that
owns the data tree, so the file lands on disk in one step (no temp +
mv dance needed). The unused `local temp_file=...` declarations dropped
out cleanly.
The trailing `runFileOp chmod 644 "$output_file"` stays — it's the only
guarantee the WebUI container (which reads these files RO) sees them as
world-readable regardless of dockerinstall's umask.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Phase 1 of the migration-system refresh. Surfaces Phase 0's kernel
(libreportal restore migrate ...) as a WebUI flow so users don't have
to drop to the CLI to pull an app from a peer's backups.
backend / data generator:
scripts/webui/data/generators/backup/webui_backup_migrate.sh
Walks every enabled backup location, lists every (other_host, app)
pair with snapshot count + latest id/date, and emits a single
destination summary block (installed apps, running apps, disk free)
so the frontend can compute collisions and warnings without per-row
API round-trips. Filters out our own hostname — we don't migrate to
ourselves. Output: data/backup/generated/migrate.json.
Hooked into the standard webuiLibrePortalUpdate refresh pipeline,
so 'libreportal regen webui' (and the periodic task-processor poll)
keep it fresh on their own.
frontend:
- New 'Migrate' sidebar tab on /backup, sits between Locations and
Configuration. Path-based URL: /backup/migrate.
- Per-source-host cards listing every available app, with snapshot
count + relative-time hint, collision dot when the app is already
installed here, and per-app + per-host migrate buttons.
- Confirm modal with two checkboxes matching the kernel's defaults:
[✓] Back up the destination's existing copy first (pre-migrate
backup; auto-disabled when there's nothing to back up)
[✓] Rewrite host-bound URLs to this host (URL rewrite
— uncheck only to keep source hostnames)
On confirm, runs 'libreportal restore migrate app/system …' via the
task system; opt-out checkboxes append --no-pre-backup / --keep-urls
only when the user un-ticks, matching the kernel's default-on flags.
- Empty state when no other hosts have visible backups, explaining
the shared-backup-location prerequisite.
The CLI dispatcher hooks (Phase 0) wire restore migrate app/system to
migrateApplyApp/migrateApplySystem, so the WebUI gets pre-backup safety,
URL rewrite, and structured progress (when --json-progress is set; not
needed here yet — the task system's log tail is enough for v1).
Signed-off-by: librelad <librelad@digitalangels.vip>
Make the system config a tracked backup, not just action buttons:
- engine: resticSystemSnapshotsJson (tag system=config) + engineSystemSnapshotsJson
dispatcher — query the system snapshots the way per-app status is queried.
- webui_backup_dashboard.sh: emit a "system": { latest_snapshot, latest_time }
object (latest system snapshot on the primary location), and exclude the
libreportal WebUI app from the per-app grid (it's intentionally not backed up, so
it no longer shows a perpetual "No backup yet" tile).
- backup dashboard card: a status line (dot + "Last backed up <relative>" / "No
backup yet"), populated in renderDashboard from d.system — mirrors the app tiles.
Verified: shell + JS parse; dashboard content assembles to valid JSON with the
system key; engine query defined + dispatched; frontend reads d.system into the
#backup-system-status element.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The apps SQLite DB ($docker_dir/$db_file) is owned by the manager user, so
read/write it AS the manager via runInstallOp instead of sudo (root). 48 call
sites across 28 scripts. In rooted this drops root->manager (correct owner);
in rootless it's the manager too (using runFileOp/dockerinstall here was the
'unable to open database' bug). The broken 'command -v sudo sqlite3' check
lines are left untouched (separate pre-existing issue).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The backup + ssh generators created their frontend/data dirs via plain/sudo
mkdir and wrote files via sudo tee/mv (root-owned), then called createTouch
(dockerinstall) which can't re-own a root file — so every write hit
'touch: Permission denied' in rootless and left root-owned data the
dockerinstall container/generators can't rewrite. Convert dir creation to
runFileOp mkdir and file writes to runFileWrite (both run as the container
owner: dockerinstall in rootless, manager in rooted), dropping the
temp/mv/createTouch dance. Also make the createFolders chokepoint mode-aware
(containers/ paths created via runFileOp) so it mirrors createTouch.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Expose the existing location_ssh.sh key store through the backup CLI:
'backup location ssh-key-set|ssh-key-generate|ssh-key-public|ssh-key-delete <idx>'
(the WebUI runs these as tasks). The locations generator now emits
ssh_key_exists + ssh_public_key (public key only — the private key never
leaves the per-location ssh.key file), so the editor can show the key state.
Also fix the stale SSH_AUTH label (~/.ssh/id_rsa -> managed per-location key).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The per-type field map lived hardcoded in backup-page.js. Add a
webuiGenerateBackupSchema generator that emits the type -> ordered field list
to data/backup/generated/schema.json (wired into the backup regen chain and
the CLI 'webui generate backup'). The editor fetches it into this.locSchema
and reads it via locFieldsForType; BACKUP_LOC_FIELDS_BY_TYPE stays only as a
fallback if the fetch fails.
Keeps the data-in-generators pattern consistent — the schema now has one
backend source of truth. The dynamic show/hide behaviors (SSH auth, path
mode, engine filtering) remain frontend logic by nature.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Adds a logical-dump path so apps with a database can be backed up with zero
downtime and full consistency, instead of stopping the container.
- backup_db.sh: dump each declared DB live (mysqldump --single-transaction /
pg_dump / sqlite3 .backup), exclude the raw data dir from the snapshot, and
replay the dump on restore (pre-start rehydrate for sqlite, post-start load
for server engines).
- Databases are declared via a 'libreportal.backup.db' compose label so the
metadata travels with the app in the snapshot.
- New 'auto' strategy (now the default): live where a DB is dumpable or the app
is marked live-safe, stop-snapshot-start otherwise. Explicit stop/pause/live
remain as overrides.
- restic/borg/kopia adapters honour an exclude list on the live path.
- Manifest records the resolved per-app strategy and dumped databases.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The WebUI data snapshots (locations.json, dashboard.json, snapshots_*.json,
etc.) are regenerated on every wizard/config change. Each file emitted two
extra success lines via createTouch — "Touching <file>" and "Updating
<file> with <user> ownership" — which spammed the output around the genuinely
useful "... JSON regenerated" line.
Add an optional "silent" flag to createTouch (third arg; default keeps the
existing loud behaviour for interactive install flows) and pass it from every
WebUI data generator/task. Touch + chown still run; only the logging is
suppressed for these background regenerations.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
A free, open, self-hosted app platform (GNU AGPLv3): one-click app deploys,
Traefik reverse proxy with automatic SSL, rootless Docker support, gluetun
VPN routing, and a web dashboard to manage it all.
Free & open forever to self-host; optional paid hosted services fund it.
See PROMISE.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
