The standalone WireGuard install used to flip net.ipv4.ip_forward by
appending+uncommenting `/etc/sysctl/99-custom.conf` via blanket sudo
(sudo tee, sudo sed, sudo sysctl -p). Two problems with that on a
de-sudoed manager:
- The path is non-standard. The conventional location is
/etc/sysctl.d/*.conf (drop-ins, loaded by sysctl --system) — the
old file may not even exist, leaving forwarding silently off.
- `sudo tee /etc` and `sudo sed -i /etc` are not in LP_SYSTEM. The
manager has lost the broad sudo it once had, so this would now
fail outright on every wireguard install.
Add a `wireguard-ip-forward` action to libreportal-appcfg that:
- writes /etc/sysctl.d/99-libreportal-wireguard.conf (a drop-in we
own and rewrite idempotently), and
- reloads via `sysctl --system` (with a `sysctl -p <dropin>` fallback).
containers/wireguard/wireguard.sh now calls `runAppCfg wireguard-ip-forward`
through the existing helper-dispatch path — the whole edit runs as root
in one validated step, no `sudo` in the per-app script.
Same de-sudo pattern as adguard-auth / crowdsec-priority / owncloud-config
already use.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
A peer is a named reference to another LibrePortal instance. Phase 2 only
implements kind=backup-channel (friendly label over a hostname that shows
up in a shared backup repo); direct-ssh-direct and direct-ssh-via-relay
(Connect's blind-relay) are reserved enum values for Phase 3.
DB schema (db_create_tables.sh):
CREATE TABLE peers (
id INTEGER PRIMARY KEY AUTOINCREMENT,
name TEXT UNIQUE NOT NULL,
kind TEXT NOT NULL DEFAULT 'backup-channel',
config_json TEXT NOT NULL DEFAULT '{}',
status TEXT DEFAULT 'unknown',
last_seen TEXT,
created_at TEXT DEFAULT CURRENT_TIMESTAMP
);
+ indexes on name and kind.
config_json is kind-specific so new transports don't need a schema
migration. For backup-channel it carries {"hostname":"","loc_idx":N}.
Bash module (scripts/peer/):
peer_helpers.sh _peerDb, peerSqlEscape, peerValidateName/Kind.
peer_add.sh peerAdd <name> <kind> [k=v ...] → INSERT, refresh
generator. Rejects unimplemented kinds early so users
don't create dead-end peer records.
peer_remove.sh peerRemove <name> → DELETE.
peer_list.sh peerList → JSON array; peerGet, peerNameForHostname
(reverse-lookup for the migrate-tab overlay).
peer_check.sh peerCheckReachable, peerCheckAll. For backup-channel
'reachable' = at least one snapshot from that hostname
visible in (preferred|any enabled) location. Updates
status + last_seen so UI dots render without re-probing.
CLI (scripts/cli/commands/peer/):
libreportal peer list
libreportal peer get <name>
libreportal peer add <name> backup-channel hostname=<host> [loc_idx=<n>]
libreportal peer remove <name>
libreportal peer check [name]
Auto-routed by cli_initialize.sh's category-discovery.
WebUI data generator (scripts/webui/data/generators/peers/webui_peers.sh):
Emits data/peers/generated/peers.json with the peerList output and a
generated_at envelope. Hooked into webuiLibrePortalUpdate alongside the
backup generators.
Frontend:
- New top-level /peers route in spa.js (PeersPage class, peers-content.html).
- 'Peers' nav item in the topbar between Backups and the right-side controls.
- Add-peer modal with friendly-name + kind + hostname + preferred-location
selector (populated from the existing backup-locations data).
- Per-peer card with status dot, last-checked time, Check + Remove buttons.
- Phase 3 kinds appear in the kind dropdown as disabled options so users
can see what's coming.
Source-array wiring:
- generate_arrays.sh auto-created files_peer.sh from the new peer/ dir.
- cli_files.sh + app_files.sh include ${peer_scripts[@]} alphabetically.
- files_webui.sh auto-picked-up the new peers/ generator subfolder.
The migrate-tab friendly-name overlay (use peer names in /backup/migrate
when a peer record exists for a hostname) is intentionally deferred — it's
a 5-line frontend lookup once peers.json is loaded; cleaner to add after
Phase 3 ships its peer-detail view.
Signed-off-by: librelad <librelad@digitalangels.vip>
configFileSetupData runs as the manager (libreportal user) during install,
but writes into /libreportal-containers/<app>/, which is owned by the
container user (dockerinstall) under the three-root layout. The six bare
`sed -i` calls in this function were missing the `runFileOp` wrapper that
every other in-tree sed-on-app-files call already uses (e.g. setup_dns.sh's
WG_DEFAULT_DNS edits), so on first run `sed -i` failed to create its temp
file in the live dir:
sed: couldn't open temporary file /libreportal-containers/linkding/sedaCaUNU: Permission denied
✗ Error Updated DOMAINSUBNAMEHERE with: bookmark.
! Notice Non-interactive mode: aborting on error.
…which aborted the install at step 3 of every per-app config setup.
Replace `result=$(sed -i ...)` with `result=$(runFileOp sed -i ...)` so each
substitution runs as the owner of the target file (via the bin-install
helper). All six call sites use the same pattern — done as a single
`replace_all` over the unique prefix.
Tags fixed: DOMAINSUBNAMEHERE, APPADDRESSHERE, DOMAINSUBNAME_DATA,
TIMEZONE_DATA, EMAILHERE, HOSTIPHERE.
Verified live on a fresh install: `libreportal app install linkding` now
completes cleanly through all 10 install steps and lands the container.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Phase 1 of the migration-system refresh. Surfaces Phase 0's kernel
(libreportal restore migrate ...) as a WebUI flow so users don't have
to drop to the CLI to pull an app from a peer's backups.
backend / data generator:
scripts/webui/data/generators/backup/webui_backup_migrate.sh
Walks every enabled backup location, lists every (other_host, app)
pair with snapshot count + latest id/date, and emits a single
destination summary block (installed apps, running apps, disk free)
so the frontend can compute collisions and warnings without per-row
API round-trips. Filters out our own hostname — we don't migrate to
ourselves. Output: data/backup/generated/migrate.json.
Hooked into the standard webuiLibrePortalUpdate refresh pipeline,
so 'libreportal regen webui' (and the periodic task-processor poll)
keep it fresh on their own.
frontend:
- New 'Migrate' sidebar tab on /backup, sits between Locations and
Configuration. Path-based URL: /backup/migrate.
- Per-source-host cards listing every available app, with snapshot
count + relative-time hint, collision dot when the app is already
installed here, and per-app + per-host migrate buttons.
- Confirm modal with two checkboxes matching the kernel's defaults:
[✓] Back up the destination's existing copy first (pre-migrate
backup; auto-disabled when there's nothing to back up)
[✓] Rewrite host-bound URLs to this host (URL rewrite
— uncheck only to keep source hostnames)
On confirm, runs 'libreportal restore migrate app/system …' via the
task system; opt-out checkboxes append --no-pre-backup / --keep-urls
only when the user un-ticks, matching the kernel's default-on flags.
- Empty state when no other hosts have visible backups, explaining
the shared-backup-location prerequisite.
The CLI dispatcher hooks (Phase 0) wire restore migrate app/system to
migrateApplyApp/migrateApplySystem, so the WebUI gets pre-backup safety,
URL rewrite, and structured progress (when --json-progress is set; not
needed here yet — the task system's log tail is enough for v1).
Signed-off-by: librelad <librelad@digitalangels.vip>
The libreportal compose template binds /libreportal-system/configs/webui/* and
/libreportal-containers into the WebUI container via #LIBREPORTAL|CONFIGS_DIR_TAG|
and CONTAINERS_DIR_TAG placeholders. The only code that knew how to substitute
those — tagsProcessorStandardReplacements — had NO callers anywhere (verified
by grep across the whole tree). Result: the deployed compose retained
CONFIGS_DIR_DATA / CONTAINERS_DIR_DATA placeholders and the safety check in
dockerComposeUp refused to start it.
Wire the two missing substitutions into the standard tag-fill block in
dockerConfigSetupFileWithData where TIMEZONE_TAG / CATEGORY_TAG / TITLE_TAG
already live — applies to every app's templating, idempotent, and unblocks the
fresh-install path. The orphaned tagsProcessorStandardReplacements function
duplicates 3 other tags that ARE filled elsewhere; left in place pending a
follow-up cleanup, but no longer the source-of-truth for these two.
Confirmed live: after running `libreportal app install libreportal` post-fix
the compose templated cleanly (no remaining *_DATA placeholders) and the WebUI
container came up — http://<host>:7270 returns HTTP/1.1 200 OK.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Triage of a broken fresh install:
1. init.sh → all root setup → completeInitMessage hands off to
`libreportal run install` as the manager.
2. start.sh sources load_sources.sh, which calls sourceCheckFiles "run".
3. sourceCheckFiles "run" calls checkUpdates — its only path to startLoad on
a non-local mode is via the git/release recovery branches.
4. git fails (the deployed install dir has no .git), lpFetchRelease fails (no
reachable release manifest), none of the recovery branches converge on
startLoad, and the install silently exits with WebUI + service unset.
Fix: completeInitMessage exports LIBREPORTAL_INITIAL_INSTALL=1, and the
sourceCheckFiles "run" branch calls startLoad directly when that's set — same
endpoint the local-mode branch hits. We just installed the latest code from
this tree; checking for updates on the first run was nonsensical and the
recovery gauntlet would only break things.
Confirmed by re-running uninstall + install: the install now reaches the
Pre-Installation / database / WebUI build / crontab / WebUI compose-up steps
and produces a working WebUI. (A separate compose-tag bug surfaced next —
fixed in the follow-up commit.)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Phase 0 of the migration-system refresh. Replaces the 77-line
scripts/migrate/ with a properly-shaped kernel that Phase 1 (WebUI) and
Phase 3 (direct peer SSH) can both build on.
New module layout (6 files):
migrate_progress.sh — migrateEmit JSON-per-line helper; opt-in via
MIGRATE_JSON_PROGRESS=1, writes to fd 3 if open
(clean WebUI streaming channel) else stdout.
migrate_discover.sh — migrateDiscoverHosts / migrateDiscoverApps /
migrateDiscoverAppDetail (JSON {snapshots, latest_*}).
Old migrateDiscoverAppsForHost kept as back-compat.
migrate_preflight.sh — migratePreflight emits one JSON object with
snapshot{id,date}, destination{installed,running,
disk_free_kb}, collision{occurs,default_action,
pre_backup_default}, url_rewrite{default_action,
per_app_opt_out}, warnings[], errors[].
Exit 0 on usable preflight, 1 on hard error.
migrate_url_rewrite.sh— Host-bound CFG_<APP>_* fields (URL/HOST/DOMAIN/
DOMAIN_PREFIX/HOSTNAME/PUBLIC_URL) get rewritten
from the destination's install-template after
restore — so a moved app stops claiming the
source's hostnames. Per-app opt-out via
CFG_<APP>_MIGRATE_URL_REWRITE=false. All other
fields (DB passwords, API keys, prefs) carry
over from the source unchanged.
migrate_pre_backup.sh — migratePreBackupDestination takes a snapshot of
the destination's existing <app> (tagged
pre-migrate=<UTC timestamp>) before the wipe.
Default ON; opt-out with --no-pre-backup. Safety
net for the always-replace collision policy.
migrate_apply.sh — migrateApplyApp / migrateApplySystem. Parses
--no-pre-backup / --keep-urls / --json-progress
opts, runs preflight → pre-backup → restoreAppStart
(existing flow) → URL rewrite → re-deploy compose.
migrateApp / migrateSystem kept as shims so the
old CLI surface still works.
CLI dispatcher (cli_restore_commands.sh + cli_restore_header.sh):
Existing 'restore migrate app/system/discover' calls all still work.
New verbs:
restore migrate list <host> [loc_idx]
restore migrate preflight <host> <app> [loc_idx] ← JSON, for the WebUI
Design choices baked in (per the spec):
- Always-replace collision (no multi-install of an app), safety net is the
on-by-default pre-migrate backup.
- URL rewrite by host-bound suffix list, not per-field allowlist — works
out-of-the-box for new apps without extra config.
- migrateEmit fd-3 contract is what Phase 1's WebUI will stream; falls
back to stdout in interactive CLI so dev/debug just works.
- Transport-agnostic: nothing in this kernel knows whether the backup
location is local/SSH/S3/Connect — engineSnapshotsJson + engineBackupApp
do that, so Connect (the future blind-relay) plugs in as 'just another
location kind' with zero kernel changes.
Smoke-tested: all 13 public functions register; JSON emit produces correct
escaping (quoted strings vs bare numerics) and respects MIGRATE_JSON_PROGRESS.
Signed-off-by: librelad <librelad@digitalangels.vip>
The migrate/ helpers were either uncallable or no-ops:
- migrateAppsToNewNetwork + updateComposeFileNetwork: never called from
anywhere. The intended sed-on-compose subnet rewrite would also have
fought the tag system / network_resources DB.
- checkAppNetworkCompatibility: called from updateDockerNetworkConfig as
a gate, but never explicitly returns, so it's effectively always-true
and both branches do the same work. Pure noise.
- getInstalledApps: only used by the above.
- updateDockerNetworkConfig: collapses to a 2-line 'CFG := docker's
reported subnet' adoption — inlined into check_docker_network.sh as
adoptDockerSubnet(), which is what it actually does.
The legitimate 'subnet changed, refresh apps' path is already covered by
the idempotent per-app reinstall (dockerInstallApp ... reset_network=true
→ clears DB allocations → installer re-runs → ipUpdateComposeTags picks
fresh IPs from the current CFG_NETWORK_SUBNET). Migration (infrastructure
regen) vs restore (data) stays clean: reinstall regenerates compose+IPs,
restore lays data on top. No new pathway needed.
Files dropped:
scripts/docker/network/migrate/migrate_apps_to_new_network.sh
scripts/docker/network/migrate/migrate_check_app_network_compatibility.sh
scripts/docker/network/migrate/migrate_get_installed_apps.sh
scripts/docker/network/migrate/migrate_update_compose_file_network.sh
scripts/docker/network/migrate/migrate_update_docker_network_config.sh
Plus the now-empty migrate/ subdir; files_docker.sh regenerated to drop
the references.
Signed-off-by: librelad <librelad@digitalangels.vip>
The hardcoded uid:gid in libreportal.backup.files labels was brittle: matched the
default PUID in the compose, but a PUID change (or new image version) would drift
silently and the next restore would chown to a stale owner. Make it impossible to
drift by letting the engine learn the uid at capture time.
backup_files.sh:
- After a successful tar capture, run `stat -c '%u:%g'` inside the container and
write the result to a <host_subdir>.lp-owner sidecar in staging. The sidecar
rides in the snapshot alongside the captured tree.
- Restore reads it back when the descriptor doesn't pin uid:gid; falls back to
0:0 with a clear notice if missing.
- The 5-field form (with explicit uid:gid) is still supported as an override; it
wins and skips the sidecar write entirely.
Update all 4 current labels to the new 3-field form
"<container>:<container_path>:<host_subdir>" (nextcloud, bookstack, gitea,
owncloud). Engine handles both formats during the transition.
Verified with stubs: 3-field capture writes the sidecar with the discovered
33:33; restore reads it back; 5-field override correctly skips the sidecar
write. backup_files.sh parses.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
If it's gluetun code, it lives with gluetun. Both functions in
scripts/config/tags/processors/tags_processor_network_mode.sh manipulate gluetun
markers / gluetun's compose, so move them into containers/gluetun/scripts/
gluetun_network.sh and rename to the per-app-hook convention:
tagsProcessorNetworkMode -> appNetworkApplyMode_gluetun
tagsProcessorGluetunForwardedPorts -> appNetworkRegisterPorts_gluetun
Central call sites are now provider-agnostic — no "gluetun" literal anywhere:
- docker_config_setup_data.sh: an app routing via CFG_<APP>_NETWORK=<provider>
triggers `appNetworkApplyMode_<provider>` + `appNetworkRegisterPorts_<provider>`
via declare -F, so any future gateway provider plugs in with no engine edits.
- uninstall_app.sh: loops every `appNetworkRegisterPorts_*` hook (each self-skips
when its provider isn't installed), so removing a routed app refreshes the
right provider with no provider name in central code.
Delete tags_processor_network_mode.sh; regenerate arrays. Verified with stubs:
default mode no-ops, gluetun-routed app fires both hooks, gluetun itself is
skipped, unknown provider is silently no-op, uninstall loop calls registerPorts.
Drive-by cleanup: 9 stale "${X_scripts[@]}" array references in app_files.sh /
cli_files.sh (gluetun + headscale from this session's moves, plus 7 pre-existing:
command/ssl/swapfile/ufw/ufwd/user — all from older refactors that left them
behind). Each expanded to nothing at runtime (harmless), but they're dead
misleading refs. Cleaned both files; every remaining array ref now points to a
real files_*.sh.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The 5 service arms in appInstallCheckRequirements (traefik/gluetun/authelia/
headscale/prometheus) were identical _appReqServiceInstalled calls. Collapse them
into one generic default: any requirement naming a real container is a service
prerequisite — so a new service requirement now needs NO code here, just list it
in the app's CFG_<APP>_REQUIRES. domain + mail stay as their own special types; a
requirement that isn't a known app is still treated as a typo and ignored (safety
net preserved). Flavor messages kept via a small optional reason map
(_appReqServiceMsg); unknown-to-the-map services get a clean generic message.
Stays central (it's the requirements engine, not per-app logic) but is now
extensible without edits. Verified with stubs: met→rc0, absent service→flavor or
generic msg, brand-new container service→generic (zero code), typo→ignored.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
dockerCheckAllowedInstall was a one-app `case` whose only active caller was the
wireguard app itself — so inline its check (abort if a host WireGuard exists at
/etc/wireguard/params, which would collide on the wg kernel module + UDP 51820)
directly into containers/wireguard/wireguard.sh and delete
scripts/docker/app/checks/allowed_install.sh.
The protection is unchanged; wireguard is now fully self-contained and the last
app name leaves central install code. Regenerated arrays. (The only remaining
dockerCheckAllowedInstall references are in scripts/unused/ — retired apps,
never sourced.)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Last app-specific bits out of central infra (from the per-app audit):
- traefik middleware: replace the hardcoded onlyoffice/owncloud exclude-list +
onlyoffice-headers special-case (in traefik_middlewares.sh AND
traefik_port_middlewares.sh) with two per-app hooks an app ships in
containers/<app>/scripts/<app>_traefik.sh:
appTraefikSkipsDefaultMiddleware_<app> (marker: opt out of default@file)
appTraefikExtraMiddlewares_<app> (echo extra middleware entries)
onlyoffice defines both; owncloud defines the skip marker. Two narrow hooks
(not one clever one) so behavior — incl. the different onlyoffice-headers
ordering between the two files — is preserved exactly. Verified with stubs:
identical middleware strings across normal/onlyoffice/owncloud × authelia/wl.
- moneyapp: add a placeholder icon (geometric banknote SVG, 512x512) so it no
longer falls back to default.svg in the WebUI.
Central traefik/compose code is now app-agnostic.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Mirror the restic system-config adapters for the other two engines, each in that
engine's own convention, so system backup/restore/status/retention work on any
location regardless of engine:
- kopia: BackupSystemToLocation (--tags system:config), SystemSnapshotsJson
(filter tag system:config), RestoreSystemLatest, ForgetSystem (per-source policy
on $configs_dir + maintenance).
- borg: BackupSystemToLocation (archive system-<host>-<ts>, comment system=config;
no app is named "system" so the namespace can't collide), SystemSnapshotsJson
(--glob-archives system-<host>-*), RestoreSystemLatest, ForgetSystem (prune the
system-<host>-* glob).
No dispatcher change needed — engineBackupSystem/SystemSnapshotsJson/
RestoreSystemLatest/ForgetSystem already resolve <engine><fn> per location. All
three engines now define the full set; syntax clean.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Final-review gaps in the system-config backup:
1. Scheduled (cron) backups skipped it — backupScheduleEnabledApps only queued
per-app backups, so the daily schedule never refreshed the system config (and
thus the backup-location creds could go stale). Now it queues a
`libreportal backup system` task (or runs inline on terminal-only installs),
and skips the reproducible libreportal app for consistency with backupAllApps.
2. No retention on system snapshots — they bypass backupAppStart's per-app forget,
so they accumulated unbounded. Add resticForgetSystem (tag system=config,
respects append-only + the same keep-* policy) + engineForgetSystem dispatcher;
backupSystemConfig now applies retention across all locations after snapshotting.
Verified with stubs: backupSystemConfig snapshots AND prunes on every location;
engineForgetSystem pairs with resticForgetSystem; scheduled createTaskFile call
matches the existing 3-arg signature.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Make the system config a tracked backup, not just action buttons:
- engine: resticSystemSnapshotsJson (tag system=config) + engineSystemSnapshotsJson
dispatcher — query the system snapshots the way per-app status is queried.
- webui_backup_dashboard.sh: emit a "system": { latest_snapshot, latest_time }
object (latest system snapshot on the primary location), and exclude the
libreportal WebUI app from the per-app grid (it's intentionally not backed up, so
it no longer shows a perpetual "No backup yet" tile).
- backup dashboard card: a status line (dot + "Last backed up <relative>" / "No
backup yet"), populated in renderDashboard from d.system — mirrors the app tiles.
Verified: shell + JS parse; dashboard content assembles to valid JSON with the
system key; engine query defined + dispatched; frontend reads d.system into the
#backup-system-status element.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Expose the system-config backup on demand (not just within 'backup all'):
- `libreportal backup system` -> backupSystemConfig (snapshot the system
config — settings, WebUI creds, backup-location creds — to all enabled locations)
- `libreportal restore system [loc_idx]` -> backupRestoreSystemConfig (restore the
latest system snapshot into a staging dir; never overwrites live config)
Distinct from the existing 'restore migrate system' (which restores all *apps*
from another host). Help text updated for both. Routing verified with stubs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
(a) Docs: reserve tools/ scripts/ resources/ as LibrePortal folder names (apps must
not bind-mount to them); document resources/ as the home for nest-able data AND for
.sh payloads that execute on load (vs scripts/ for sourced functions); document the
backup model (what's captured vs reproducible).
(b) System-config backup so a bare-metal restore is self-sufficient — this is why
the system root is its own tree. New scripts/backup/system/backup_system.sh:
- backupSystemConfig snapshots <system>/configs (global settings, WebUI creds, and
the BACKUP-LOCATION creds — otherwise the keys to reach your own backups live only
on the box) to every enabled location. Lightweight static-dir snapshot — it does
NOT go through backupAppStart (no containers to quiesce / DBs to dump).
- restic adapter resticBackupSystemToLocation (tag system=config) + dispatcher
engineBackupSystem; restore via resticRestoreSystemLatest / engineRestoreSystemLatest
+ backupRestoreSystemConfig (restores to a STAGING dir — never auto-overwrites
live config).
- backupAllApps runs it after the app loop.
WebUI exclusion: backupAllApps skips the 'libreportal' app — its frontend + generated
JSON regenerate, and its only state (the login) is in the system config now captured
above. Nothing in its data dir warrants a snapshot.
Verified with stubs: app loop skips libreportal + invokes the system backup; the
system backup dispatches to both locations; backup/restore function names pair with
the dispatcher. NOTE: restic-only (the sole live engine adapter); end-to-end repo
round-trip still needs a live box before being relied on.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Move the whole central scripts/headscale/ tree into containers/headscale/, the
last app-specific dir living centrally:
- 11 sourced function files (incl. the former local/ remote/ subdirs) flattened
into containers/headscale/scripts/ — flat because the container scan is
maxdepth 3, so one subfolder level is the limit; basenames already encode the
local/remote distinction.
- tailscale.sh is a CONTAINER PAYLOAD (ends in a bare `install_tailscale` call,
runs apt/curl) — it must never be sourced into the manager, so it goes to
containers/headscale/resources/ (pruned by the scan), NOT scripts/. Verified
install_tailscale does not leak into the runtime after sourcing.
- Fix tailscaleInstallToContainer to copy the payload from its new resources/
path (it previously referenced ${install_scripts_dir}tailscale.sh, which never
matched the file's actual location) and drop the dead commented docker-cp line.
- Remove the now-moot headscale special-case from generate_arrays.sh; regenerate
(files_headscale.sh drops — headscale is fully container-scanned now).
All 11 functions source + define cleanly; callers resolve by name regardless of
location.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
docker_config_setup_data.sh's "App Specific" if/elif ladder (pihole, nextcloud,
searxng, speedtest, vaultwarden, wireguard, gluetun) becomes a generic hook
dispatch: an app needing computed (non-CFG) compose tags ships
containers/<app>/scripts/<app>_compose_tags.sh defining appSetupComposeTags_<app>
(live-sourced by the container scan, called with the compose path; reads
host_setup/public_ip_v4/CFG_* from scope). Same declare -F pattern as the tool /
update-specifics / webui-refresh hooks.
- 7 per-app hook files added; central ladder replaced by the dispatch.
- The generic gluetun network-mode block stays (any app may route through gluetun);
tagsProcessorGluetunForwardedPorts stays central (hook + network-mode both use it).
- Regenerate arrays (hooks live under containers/, not arrayed).
Verified with stubs: each hook emits exactly the tags the old branch did
(pihole REV_SERVER, nextcloud trusted-domains, gluetun VPN set + forwarded ports,
etc.); apps without a hook are a clean no-op.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Move scripts/webui/data/generators/apps/webui_gluetun_providers.sh ->
containers/gluetun/scripts/gluetun_providers.sh and replace the gluetun-specific
gated call in webui_updater.sh with a generic per-app loop: an installed app may
define appWebuiRefresh_<app> (in its scripts/) for data it wants refreshed on
every WebUI update. gluetun provides appWebuiRefresh_gluetun (a thin wrapper over
webuiGenerateGluetunProviders).
- No gluetun-specific code remains in central WebUI code — it's a true drop-in.
- Install gate preserved + generalized: the loop iterates the manager-owned
install templates (listable) and tests each app's live compose directly (works
without list perm on the container-user data dir), so non-users never pay for it.
- webuiGenerateGluetunProviders keeps its name (still called by the installer and
the gluetun_refresh_providers tool); now sourced via the container scan.
- Regenerate arrays (generator drops out of files_webui).
Loop verified with stubs: only installed apps with a defined hook fire; apps
without a hook are skipped; nothing fires when nothing's installed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Replace the central app-name if-ladder in app_update_specifics.sh with a generic
dispatcher: each app ships containers/<app>/scripts/<app>_update_specifics.sh
defining appUpdateSpecifics_<app> (live-sourced by the container scan, dispatched
by `declare -F` — same pattern as tools). A hook may set shouldrestart=true. Apps
with no specifics ship no hook.
- Move the adguard/pihole (DNS updater), dashy (conf refresh), focalboard (nobody
ownership + restart), and libreportal (webui regen) branches to per-app hooks.
- Move scripts/gluetun/gluetun_route_apps.sh -> containers/gluetun/scripts/
(scripts/gluetun/ removed).
- Move scripts/install/install_crowdsec.sh -> containers/crowdsec/scripts/
crowdsec_install_host.sh; fix the path note in crowdsec.sh.
- Regenerate arrays (moved files drop out; the per-app files are container-scanned,
not arrayed).
Dispatch verified with stubs: adguard/pihole/dashy/focalboard/libreportal behave
identically to the old ladder (incl. shouldrestart propagation), apps without a
hook are a clean no-op. The CLI itself had no per-app branches — app-specific CLI
is already the (now fully modular) tools system.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The rename was justified partly by an anticipated second `libreportal-regen`
unit — which we then decided not to create (the poll rides the existing task
processor). What's left is cosmetic, and it isn't worth a footprint_version bump
(which forces a root re-install on every existing box) plus the dual-name
migration cruft.
Reverting also means the rename was the ONLY footprint change in the regen work,
so the whole regen system now ships as a plain manager-owned code deploy — no
root re-install needed. footprint_version stays 2.
Kept only the accurate FOOTPRINT.md note that the service also drives the poll.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The single systemd unit is the task processor (and now also drives the periodic
regen poll), so name it for what it does instead of the ambiguous bare
"libreportal.service" — clearer now that the runtime has more than one concern.
- svc helper: SERVICE_NAME=libreportal-taskprocessor.service; _drop_legacy()
stops/removes the pre-rename unit on install (idempotent migration) so an
upgraded box never runs two processors.
- init.sh: read baked roots from the new unit (fall back to the old name);
uninstall removes both names; bump footprint_version 2 -> 3 (root-owned unit
changed, so a manager-run update flags "root re-install needed").
- check_webui_systemd: accept either name during the transition.
- docs/FOOTPRINT.md: new unit name + uninstall command.
No sudoers change — it allows /usr/bin/systemctl generically, not a named unit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Add `lpRegen` (scripts/webui/webui_regen.sh) — one entry point that rebuilds the
file-derived artifacts whose sources changed, so callers don't have to know which
generator owns what. Self-heal is a cheap `find -newer` mtime compare (no watcher
/ daemon): a stage runs only when a source is newer than its artifact, or --force.
- `libreportal regen [all|webui|arrays] [--force]` CLI command (new category).
- Task processor idle tick runs a throttled `regen webui` poll, so an app dropped
in out-of-band (drag-drop / marketplace) appears on its own — no manual command,
no inotify (works on the relocatable/external-drive roots where inotify can't).
- make_release.sh guards against shipping stale source arrays (regenerate; abort
if the committed tree was out of date), killing the "forgot generate_arrays" bug
class at the build boundary.
- Document the front door in DEVELOPMENT.md.
webui scope rebuilds from containers/<app>/{*.config,tools/*.tools.json}; arrays
scope from scripts/** (a dev/build concern — a no-op on a normal install). Gate
logic verified in a sandbox (clean/config-newer/tools-newer/force/missing).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Each app now carries everything under containers/<app>/: Tools-tab actions in
tools/ (declaration <app>.tools.json + function <app>_<tool_id>.sh) and logic
helpers in scripts/ (e.g. <app>_auth.sh). The container scan live-sources every
.sh under the app (maxdepth 3, prunes only resources/) and webui_tools.sh
auto-merges the .tools.json, so an app is a true drop-in — no central edit, no
array regen.
- Empty the central webui_tools.sh heredoc; all 34 tools across 11 apps now
come from per-app declarations (verified byte-identical to the old output).
- Retire the orphaned mattermost tool scripts to scripts/unused (there is no
containers/mattermost; its install fn already lived in unused).
- Update the dispatch comment/error path, the auth-adapter doc, and
DEVELOPMENT.md to the new convention.
- Regenerate static arrays (files_app.sh no longer lists app/containers/*).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Establish the self-contained tools convention and prove it on a core app:
- discovery now reads containers/<app>/tools/<app>.tools.json (the tools/ subfolder);
tool functions live at containers/<app>/tools/*.sh, auto-sourced by the container
scan (depth 3) — no scripts/app/ entry, no array regen.
- adguard migrated: its 2 Tools-tab actions (reset_password, apply_dns_updater) moved
to containers/adguard/tools/ + tools/adguard.tools.json, and dropped from the
central webui_tools.sh heredoc. adguard_auth.sh stays in scripts/app/ — it's a logic
helper, NOT a tool (the key distinction: only DECLARED tools move).
Central + per-app styles coexist (pihole etc. still central), so the remaining apps
can migrate one at a time with nothing breaking. Verified: heredoc valid sans adguard,
per-app merge re-adds adguard's 2 tools, scripts array dropped the moved fns.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
webui_tools.sh now merges any containers/<app>/<app>.tools.json into apps-tools.json
(jq, sets .apps[<app>]) on top of the central heredoc. So a dropped-in app — e.g.
from LibrePortal-Infra — registers its own Tools-tab actions WITHOUT editing this
file. Combined with the container scan already sourcing containers/<app>/*.sh live,
an app can now be fully self-contained (install fn + tool fns in <app>.sh + tool
declarations in <app>.tools.json) → true copy-on-top deploy, no array regen, no
central edits. Core apps in the heredoc are unaffected; invalid tools files are
skipped with a notice. Verified the merge (drop-in registers, core preserved).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
getlibreportal (downloads host) + weblibreportal (website) — including the website
Eleventy source and the publish tool functions — now live in the separate
LibrePortal-Infra repo (Webstar/LibrePortal-Infra). They're the project's own
outward-facing hosting, not something users install, so the base stays clean.
Removed from base: containers/{getlibreportal,weblibreportal}, the
scripts/app/containers/<app>/<app>_publish.sh tool functions, and their entries in
webui_tools.sh; regenerated the sourced-file arrays; dropped the dead .gitignore
docroot lines. scripts/release/make_release.sh stays here (it builds the base
release). docs/DEVELOPMENT.md now points publishing at LibrePortal-Infra.
LibrePortal-Infra overlays onto an install and picks up releases/catalogue from the
base tree — see its README.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Surface the publish step through the existing Tools system (apps-tools.json -> Tools
tab + 'libreportal app tool <app> publish'), so the docroot can be (re)built from
the WebUI instead of a manual cd + script.
- webui_tools.sh: declare a 'publish' tool (no inputs) for getlibreportal + weblibreportal.
- scripts/app/containers/getlibreportal/getlibreportal_publish.sh (appGetlibreportalPublish):
runs the host's publish.sh into the served data dir, as the container user (owns it).
- scripts/app/containers/weblibreportal/weblibreportal_publish.sh (appWeblibreportalPublish):
builds Eleventy as the manager (owns the install tree), then syncs the result into
the container-user-owned docroot — handling the build-vs-write owner split.
- Both guard for the build prerequisites (repo source / npm / dist) and fail with a
clear message; regenerated the sourced-file arrays.
Honest status: scaffolding only — wiring verified (dispatch names match, files sourced,
JSON valid) but the end-to-end tool RUN is untested, and it's build-box-only (needs the
repo checkout + npm + a built dist/). These hosting apps are dev-only and headed for a
separate repo; this just sets the automation up so it's ready to iterate on.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The sha256 only proves a download is intact; a compromised host could swap the
tarball + its checksum. Add minisign signatures, which prove authenticity (the host
can't forge them without the offline secret key). Ships INACTIVE behind a REPLACE_ME
placeholder, so installs work until a real key is generated; then it's REQUIRED.
- make_release.sh: signs the tarball when LP_MINISIGN_SECKEY is set -> <tarball>.minisig.
- libreportal.pub: the public key (placeholder), ships in the tarball and is installed
to the ROOT-OWNED footprint (/usr/local/lib/libreportal/libreportal.pub) by init.sh
-> the manager can't swap it to accept forged updates. footprint_version -> 2.
- install.sh: LP_MINISIGN_PUBKEY constant; once non-placeholder, downloads + verifies
the .minisig (minisign -P) and REFUSES on invalid/missing (auto-installs minisign if
needed). --no-verify-signature is a dev-only escape hatch.
- fetch.sh (update path): verifies against the footprint .pub (minisign -p), refuses on
invalid/missing.
- docs/DEVELOPMENT.md: keygen (minisign -G), paste pubkey into libreportal.pub +
install.sh, keep the secret key offline, sign builds via LP_MINISIGN_SECKEY, bump
footprint_version on key rotation.
Verified end-to-end with a real throwaway key: good signature accepted; tampered,
wrong-key, and missing-signature all refused; placeholder skips (sha256 still enforced).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
A manager-run 'update apply' refreshes code/apps/WebUI but CANNOT rewrite the
root-owned footprint (helpers/wrapper/uninstall/unit/sudoers) — that immutability
is the de-sudo boundary. Previously a release that changed those would silently
leave them stale. Make it explicit:
- init.sh: footprint_version=1 constant, baked at install into
/usr/local/lib/libreportal/.footprint_version (root:root 0644) by initRootHelpers.
Bump it whenever a root component changes.
- make_release.sh: publishes footprint_version in latest.json.
- fetch.sh: lpInstalledFootprintVersion (marker) + lpReleaseLatestFootprint (manifest).
- check_update.sh: 'update apply' REFUSES when the release's footprint_version
exceeds the installed one, directing to a root re-install (which fetches +
re-bakes everything atomically). No half-applied updates.
- webui_system_update.sh: badge sets footprint_update_needed + clears can_update so
the WebUI won't offer a one-click apply for a footprint-bumping release.
- docs/DEVELOPMENT.md: the bump rule + the footprint exception explained.
Verified: manifest carries footprint_version; drift decision correct both ways
(no marker/older -> needs re-install; equal -> no drift).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The git-era recovery commands now do the right thing in release mode instead of
attempting a clone:
- gitReset (libreportal reset / update reset) and runReinstall (CLI/system reset,
missing-files recovery): a release branch re-fetches the verified tarball via
lpFetchRelease, then refreshes /root/init.sh + ownership.
- the CLI wrapper's clone_and_install (libreportal reset): sources fetch.sh and
re-fetches the release; falls back to directing the user to the install.sh
bootstrap if the helper isn't present.
git/local behaviour unchanged. Wrapper still bakes cleanly (no placeholders left).
Phases A–D (release build, bootstrap installer, fetch abstraction, release-aware
install + update + recovery) are complete and locally verified. Remaining: phase E
(host install.sh + channels + tarballs on get.libreportal.org) and a real fresh
install on a throwaway box.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Make the WebUI updater work off release versions, not git commits, in release mode
(git/local paths untouched):
- webui_system_update.sh: a release branch resolves latest_version from the channel
manifest (lpReleaseLatestVersion), computes update_available via lpVersionGt vs
the local VERSION, reuses the same throttle + the same update_status.json schema
(source="release"); reuses last-known latest when throttled so the badge
doesn't flicker.
- check_update.sh webuiRunUpdate: a release branch version-compares and, if newer,
lpFetchRelease (download + checksum-verify) the new tarball + dockerInstallApp
redeploy + regen. No config-backup dance — lpFetchRelease replaces only the
install tree; configs/logs are in the separate system tree.
Verified against a local server: latest-version read + the no-update / update-
available decision (0.2.0==0.2.0 no; 0.3.0>0.2.0 yes). Remaining: route the
reset/reinstall recovery paths through the release fetch.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Adding scripts/release/ made generate_arrays emit files_release.sh, which would
source the build tool make_release.sh at runtime (it runs git archive at load —
wrong + harmful). Skip release/ in the folder scan (like system/ and unused/),
remove the orphaned files_release.sh, and regenerate the meta-list. fetch.sh stays
sourced; make_release is in no array.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
scripts/source/fetch.sh (sourced at runtime via files_source.sh):
- lpFetchRelease [ver]: resolve channel manifest -> download tarball -> VERIFY
sha256 (refuse on mismatch/absence) -> replace the install tree ( is
code-only now; configs/logs live in the separate system tree, so no backup
dance). Host/channel from LP_RELEASE_BASE_URL/CFG_RELEASE_BASE_URL + channel.
- lpFetchSource: dispatch release|git|local.
- lpVersionGt: numeric dotted semver compare (used by the updater + badge).
init.sh initGIT is now release-aware: the bootstrap (install.sh) stages+verifies
the code and sets LP_ALREADY_FETCHED=1 (skip re-fetch); a direct release run sources
fetch.sh; a bare /root reinstall is directed to install.sh. install.sh exports
LP_ALREADY_FETCHED + LP_RELEASE_BASE_URL on hand-off. validateUnattended already
accepts release (git-url is gated on git mode).
Config: CFG_INSTALL_MODE default -> release, + CFG_RELEASE_BASE_URL / CFG_RELEASE_CHANNEL
(add-only reconcile preserves existing installs' git/local mode).
Verified: lpVersionGt across cases; lpFetchRelease downloads+verifies+extracts a
clean tree against a local server. The updater + reset/reinstall release paths are
phase D.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
scripts/release/make_release.sh builds a versioned, checksum-verified release
artifact from the committed tree via 'git archive' — the basis for installing
LibrePortal without git/auth. Output lands in dist/<channel>/ laid out as the
hosting will serve it (libreportal-<ver>.tar.gz + .sha256 + latest.json), so it
can be served locally for testing via LP_RELEASE_BASE_URL.
.gitattributes marks dev-only trees export-ignore (scripts/unused, scripts/release,
site, .claude, CONTRIBUTING.md, the git meta files) so they never ship; validated
the archive includes init.sh/start.sh/scripts/configs/containers/VERSION and
excludes all of the above. dist/ gitignored.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
sudo_user_name (the real manager — owns the install, runs the runtime, baked as
__MANAGER__ into the root helpers) was hardcoded to 'libreportal'. Make it
configurable, consistent with the relocatable roots:
- --manager-user=NAME flag + LP_MANAGER_USER env (default libreportal); resolved
early in init.sh and in scripts/source/paths.sh (so the standalone processors
get it too), validated as a real Linux username in libreportalValidatePaths.
- Baked everywhere it must be stable: the helpers + CLI wrapper (CHECK_USER now
__MANAGER__, exports LP_MANAGER_USER) via the install-time sed; the systemd unit
exports LP_MANAGER_USER=<manager>. User creation (initUsers), the sudoers
drop-in, and ~35 call sites already used $sudo_user_name, so they follow.
- Fix the stray manager-name literals: install_crowdsec.sh chown, the
check_install_type fallback. (Brand/identity strings like the backup
engine:libreportal tag are left — they're not the username.)
Verified: resolves default/env/flag; wrapper bakes a custom name (admin) with no
placeholders left; validation rejects invalid usernames. The footprint paths
(/etc, /usr/local) stay fixed by design.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
CFG_DOCKER_MANAGER_USER / installDockerManagerUser was a chrooted SFTP file-access
user — unrelated to the LibrePortal control-plane manager (sudo_user_name), and
the source of the 'two managers' confusion. It was permanently-off dead code: the
gate CFG_DOCKER_MANAGER_ENABLED and the CFG_DOCKER_MANAGER_USER/_PASS keys are
defined in no config template, so it never ran. Its SSH-key-management sibling
(unused/ssh_manager.sh) was already retired; admin host SSH access is handled by
the current /ssh page + scripts/ssh/host_access.sh.
Move install_user_manager.sh / uninstall_user_manager.sh / check_manager.sh to
scripts/unused/manager/ (recoverable, matches the graveyard convention — not
deleted, in case the SFTP-user idea is rebuilt cleanly later), drop the two call
sites (start_preinstall.sh, check_requirements.sh), regenerate the arrays.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Audit follow-up — after a full-repo sweep, the only remaining functional /docker
refs are intentional (the legacy compat shim + the env-overridden legacy-safe
backend default). Fix the last user-visible/stale ones:
- config-options.js: backup PATH_MODE 'auto' label no longer hardcodes
/docker/backups (the path is relocatable) — describes the behaviour instead.
- config.js / setup-detector.js / webui_install_image.sh: refresh comments that
named /docker to the relocatable system/containers roots.
No behaviour change. Active container app scripts already use $containers_dir;
the remaining /docker hits across the tree are docker-compose.yml filenames,
/var/lib/docker, the docker binary, relative array paths, docs/site, and the
unused/ graveyard.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
backupLocationLocalGuard (engine-agnostic, in location_paths.sh), wired into the
dispatcher before init, readiness, and every backup write (engineInitLocation /
engineEnsureLocationReady / engineBackupApp):
- Filesystem warning: the ownership model chowns the repo to the backup user, which
needs POSIX permissions — warn (non-fatal) on FAT/exFAT/NTFS via findmnt FSTYPE.
- Mount-presence refusal: a location with CFG_BACKUP_LOC_<idx>_REQUIRE_MOUNT=true
(an external/removable disk) is refused when its path isn't on a real mount
(findmnt TARGET is '/' or unknown) — so an unplugged drive never silently fills
the system disk. Opt-in; default false leaves on-disk locations unaffected.
New REQUIRE_MOUNT field documented in the location.config template (location_add.sh)
so it surfaces on the Locations page. Verified: REQUIRE_MOUNT+unmounted refuses;
default allows; non-local no-ops.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Split the single tree into three owner-isolated roots and fix the backup
permission failure (restic, running as the container user, could not write the
manager-owned /docker/backups).
Ownership helper (libreportal-ownership), rewritten for three baked roots:
SYSTEM_DIR (manager) CONTAINERS_DIR + BACKUPS_DIR (container user)
- reconcile now drives each tree to its single owner; backups + the WebUI dir go
to the container user (the actual fix). The container user reaches only the
WebUI bind-mount sources (configs/webui/*) via a scoped _webui_bind_access —
traverse the system root + configs, read configs/webui only, nothing else.
- defence-in-depth: refuse dangerous/relative roots even if mis-baked; new
backups-top action.
Baking: init.sh initRootHelpers now seds __SYSTEM_DIR__/__CONTAINERS_DIR__/
__BACKUPS_DIR__ (alongside __MANAGER__) into every helper at install — the trust
boundary stays root-controlled. svc/socket/appcfg helpers updated to derive from
the baked SYSTEM_DIR; the svc unit now exports LP_*_DIR so the processor resolves
roots authoritatively. A baking-safe '*"__"*' sentinel check survives the sed.
Install/uninstall: initFolders creates the three roots; initContainerLayer hands
containers + backups to the container user; uninstall removes all three
(idempotent on legacy single-tree installs). Remaining functional /docker
literals in init.sh (config reads, setupConfigsFromRepo, uninstall) parameterised.
Compose: the WebUI's two relative ../../configs mounts (the only cross-tree
relative mounts in the tree) are now absolute, filled at generation via a new
CONFIGS_DIR_TAG; CONTAINERS_DIR_TAG likewise for the LP_CONTAINERS_DIR env.
Live box unaffected: installed helpers + the live compose only change on reinstall/
rebuild (both of which fill the tags); the CLI-wrapper heredoc paths are baked in
phase 3.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Introduce scripts/source/paths.sh as the canonical path resolver for three
independently-relocatable roots:
LP_SYSTEM_DIR manager-owned control plane (configs/logs/install/db/ssl/ssh/migrate)
LP_CONTAINERS_DIR container-user-owned live app data
LP_BACKUPS_DIR container-user-owned backup repos (own mount-able)
Roots come from the environment when set (install bakes them; CLI/app inherit
from init.sh), else default to /libreportal-*. A transitional compat default
keeps EXISTING installs (legacy single /docker tree, by config marker) on /docker
until a deliberate reinstall, so deploying this never strands a running box.
- init.sh derives the same vars inline (self-contained for the bare /root/init.sh
reinstall case); paths.sh mirrors it for the standalone task/check processors,
which now self-locate their scripts dir and source it.
- Replace functional /docker literals with the derived vars across runtime,
install, backup, crontab, crowdsec/restic, headscale, and reinstall paths;
clean the inert '== /docker/containers/*' guard fallbacks to the variable form.
- backend: CONTAINERS_DIR now from LP_CONTAINERS_DIR (compose env, filled at
generation via a new CONTAINERS_DIR_TAG), legacy-safe default for un-recreated
containers.
- backup default path falls back to the backups root; exclude paths.sh from the
sourced-file arrays (bootstrap file, sourced explicitly).
The CLI-wrapper heredoc + root helpers still reference /docker; those get baked
in phase 3. No layout/ownership change yet (phase 2).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
When the task processor service is down the rootless daemon socket is
absent, so the pre-install `docker images` probe printed a raw daemon
connection error to the terminal. The surrounding notices already convey
the meaningful state (service not running → image not setup), so the raw
error was noise.
Capture the probe output and redirect its stderr to libreportal.log
instead of the terminal, keeping the detail for diagnostics.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Same class of bug as the topbar partial: icon and data-file references were
relative (icons/apps/x.svg, data/apps/...), so on deep path routes (/app/<name>,
/admin/config/x) the browser resolved them against the route dir and the SPA
catch-all served index.html with HTTP 200 instead of 404 — broken images and
silently-wrong JSON.
Make every reference absolute (anchored on the quote/backtick so already-absolute
/icons paths are untouched):
- JS: all icons/ and data/ literals + templates across components/utils/system
- html/topbar.html: logo <img>
- generators: webui_config.sh and webui_create_app_categories.sh now emit
/icons/... into apps.json / apps-categories.json (regenerated on install)
- updated the two icon-path comments to match
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Reverts the 2>/dev/null band-aids and fixes the root cause. The
manager-run install boot scans app configs under /docker/containers AS
the container user (runFileOp). But init.sh's initFolders creates that
dir manager-owned, and the handover to the container user happened later
(start_preinstall), AFTER the boot scans — so the scans ran as the
container user against a dir it didn't own yet: "find:
'/docker/containers/': Permission denied" (cosmetic; the dir is empty
that early, but it's the wrong ownership at the wrong time).
Add initContainerLayer() to init.sh's root phase (after initGIT +
initUpdateConfigs, before the manager-run handoff): rootless-only, it
creates the docker-install user if missing and chowns /docker/containers
to it (751). The later rootless setup is now idempotent — it finds the
user existing and just (re)asserts its password + daemon config (moved
updateDockerInstallPassword out of the create-only branch). Rooted is
unaffected (containers stay manager-owned, which the manager reads).
Result: by the time the boot scans run, /docker/containers is owned by
the user doing the scanning — no permission error, nothing suppressed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Early in an install the docker-type config isn't loaded yet, so runFileOp
falls back to the manager, which can't list the container-owned (751)
/docker/containers/ dir. Two best-effort scans then leaked
"find: '/docker/containers/': Permission denied" to the install output
(x3 per run): scan_files.sh's app_configs scan and the application config
reconcile. No app configs exist that early on a fresh install, so the
empty result is correct — just suppress the find stderr (the -print0
output still flows). Cosmetic only; doesn't change what's enumerated once
the config is loaded.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
On a fresh install the requirement checks run before the things they
probe exist, leaking raw command stderr:
- check_install_type.sh: `$( (id -u "$user") )` printed
"id: 'dockerinstall': no such user" to the terminal AND — since id's
error goes to stderr, not the captured stdout — the next line's
`[[ "$ISUSER" == *"no such user"* ]]` could never match, so the
rootless-user-absent branch was dead. Add `2>&1` (matching siblings on
lines 25/31): no leak, and the check now works.
- grep on $sysctl (the rootless marker conf, absent until rootless is set
up) printed "grep: /etc/sysctl.d/99-libreportal-rootless.conf: No such
file or directory". Add -s to the four $sysctl greps
(check_docker_rootless, rootless_start_setup, rootless_docker x2);
"marker absent" is still detected (non-zero exit), just without the
file-not-found message.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The two docker-type-switcher finds run mid-switch, BEFORE
reconcileDockerOwnership, so containers/ is still owned by the OLD mode's
container user while CFG_DOCKER_INSTALL_TYPE is already the target. A
plain runFileOp resolves to the target user, which can't list the
old-mode-owned (751) dir under rootless — so enumerate as the old-mode
owner instead:
- switchMigrateBackupApps: move the find inside the existing
old_mode/resolveDockerInstallUser window (runFileOp now resolves to the
old owner). It previously ran as the manager and silently enumerated
nothing under rootless, so no app got backed up before the switch.
- dockerSwitcherUpdateContainersToDockerType: take old_mode as an arg,
flip CFG to it only for the find (restore before the per-app socket
scan + restart, which need the new daemon). Callers in swap_docker_type
pass $docker_type. The two former rooted/rootless branches were
byte-identical and are collapsed.
NOTE: the full rooted<->rootless switch round-trip is still unvalidated
on the VM (needs a stateful app + an enabled backup location); this fixes
the container enumeration, not yet the end-to-end migration.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Bare `find "$containers_dir"` runs as the manager, but under rootless
containers/ is dockerinstall-owned 751 (traversable, not list-readable by
the manager) -> "find: /docker/containers/: Permission denied". For the
app-log generator that was cosmetic; for dockerComposeUpAllApps /
dockerComposeDownAllApps it silently enumerates nothing so no apps come
up/down. Route these through runFileOp find (dockerinstall in rootless,
manager in rooted — correct in both). The two docker-type switcher finds
are deliberately left: mid-switch the at-rest container owner can differ
from the target-mode user runFileOp resolves to, so they need mode-aware
handling rather than a blind swap.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
