resticRestoreSnapshot forgives the un-mappable-uid lchown failures so a restore
is not aborted by them, and reported: "expected, they are already owned
correctly". That is true only for LibrePortal's own files, whose owner is the
backup user restic already runs as. It is false for container-owned data.
_resticUsernsPrefix maps the subuid range and root, but unshare takes one range
per option so the backup user's own GID is never mapped — and app data is
written as <container-uid>:<backup-user>. Every such chown fails with EINVAL and
the file falls back to <backup-user>:<backup-user>. Verified directly:
231543:231543 applies, 231543:1002 does not.
Observed on a 13-app restore: grafana's grafana.db is recorded as 231543:1002
and landed as 1002:1002, so grafana (running as 231543) could not write it at
mode 0640 and died with "attempt to write a readonly database" — under a restore
that reported success. 1626 of that run's 2086 failed chowns were grafana's.
This commit does not fix the mapping — that is the backup engine's ownership
handling rather than the first-run restore path, and the candidate fixes
(newuidmap multi-range maps, or restoring as root via a path-validated helper)
want a decision first. See docs/roadmap/first-run-restore.md §3.5. What it fixes
is the reporting: count the files and say plainly that container-owned data was
not reinstated and the app may fail to write.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Restore built its restic include filter from THIS host's containers root:
engineRestoreSnapshot "$idx" "$id" "/" "$containers_dir$app"
restic reproduces a snapshot's absolute paths, so that only works when
both sides agree byte-for-byte. LibrePortal has shipped configurable
roots for a while, so restoring a snapshot taken on a host installed with
--containers-dir=/mnt/ssd/apps onto a default host matched no include
path and restored NOTHING — with no error, because an include filter that
matches nothing is not a failure. Storage locations turn that from a rare
cross-host case into an ordinary one.
storageSnapshotSourcePath asks the repository where the app actually
lived. storageRestoreAppTo restores in place when that agrees with where
the app belongs here, and stages-then-moves when it does not — which is
also what makes "restore this app onto a different disk" possible at all.
Both restore_app_start.sh and resticRestoreAppLatest go through it, and
both fall back to the old behaviour when a snapshot does not report its
paths, so older snapshots restore exactly as before.
The move into place runs as root (app-adopt) for the same reason app-move
does: a restored tree carries container sub-UIDs the manager cannot
recreate. Staging is constrained to the restore/migrate area and the
destination is validated against the root-owned registry, so neither end
is taken on trust from the caller.
The manifest now records where an app lived — location name, path and fs
uuid. The name is what travels, since a path means nothing on the other
host; the rest is for diagnostics and for answering "is this the same
disk?" during a migrate.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The main sweep — ~260 call sites across ~100 files move from string
concatenation on a single root to appDir/storageAppDirs/storageAppConfigs.
On a single-root install the resolved paths are identical, so this is a
no-op until a location is registered.
Enumerators were the interesting half. `for d in "$containers_dir"/*/`
appears in the menus, the registry/artifact scanners and the DNS setup —
and a shell glob cannot list a rootless 751 tree at all, which is the
same bug config_find_file.sh already documents in a comment. Routing them
through storageAppDirs (which enumerates as the owning user) fixes that
alongside the multi-root work.
Three places needed judgement rather than substitution:
db_app_scan.sh deletes database rows and port allocations for apps whose
folder is missing, and reaps "empty" app dirs. With a storage location
unmounted, every app on it looks exactly like that. Each of those
branches now gates on appStorageAvailable first — an app on an unplugged
drive is skipped with a notice, never deleted.
instance_create.sh rewrites cloned hooks so an instance touches its own
directory instead of the base app's. Its sed matched ${containers_dir}<type>,
which this sweep just replaced with $(appDir <type>) — so it would have
silently stopped redirecting, and an instance would have written to the
original's files (the adguard auth adapter case its own comment warns
about). Now matches both appDir forms, verified against bare, quoted,
unrelated-app, legacy and prose cases.
peer_shell/peer_pull streamed and extracted relative to the primary root.
Both now use the app's own root, and peer_shell keeps a single-root
fallback since it runs as a restricted SSH shell with no LibrePortal env.
Also fixes a pre-existing bug found on the way: webui_app_config.sh
tested "$containers_dir/frontend/data/last_update", one level short of the
real tree under the libreportal app dir, so the WebUI refresh trigger
after a config update has never once fired.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both _titleBlock implementations title-cased the slug themselves instead of
calling getAppDisplayName, so the Tools tab read "Run app-specific actions for
Rocketchat" and Services read "the docker compose services that make up
Speedtest".
getAppDisplayName already resolves a slug to the app's declared title through
window.apps. Using it fixes four apps beyond Rocket.Chat:
rocketchat Rocketchat -> Rocket.Chat
speedtest Speedtest -> LibreSpeed
ipinfo Ipinfo -> IPinfo
libreportal_catalog Libreportal Catalog -> LibrePortal Catalog
The slug casing is kept as the fallback for the window.apps-not-loaded-yet case,
which is what the helper does internally anyway.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
(a) Docs: reserve tools/ scripts/ resources/ as LibrePortal folder names (apps must
not bind-mount to them); document resources/ as the home for nest-able data AND for
.sh payloads that execute on load (vs scripts/ for sourced functions); document the
backup model (what's captured vs reproducible).
(b) System-config backup so a bare-metal restore is self-sufficient — this is why
the system root is its own tree. New scripts/backup/system/backup_system.sh:
- backupSystemConfig snapshots <system>/configs (global settings, WebUI creds, and
the BACKUP-LOCATION creds — otherwise the keys to reach your own backups live only
on the box) to every enabled location. Lightweight static-dir snapshot — it does
NOT go through backupAppStart (no containers to quiesce / DBs to dump).
- restic adapter resticBackupSystemToLocation (tag system=config) + dispatcher
engineBackupSystem; restore via resticRestoreSystemLatest / engineRestoreSystemLatest
+ backupRestoreSystemConfig (restores to a STAGING dir — never auto-overwrites
live config).
- backupAllApps runs it after the app loop.
WebUI exclusion: backupAllApps skips the 'libreportal' app — its frontend + generated
JSON regenerate, and its only state (the login) is in the system config now captured
above. Nothing in its data dir warrants a snapshot.
Verified with stubs: app loop skips libreportal + invokes the system backup; the
system backup dispatches to both locations; backup/restore function names pair with
the dispatcher. NOTE: restic-only (the sole live engine adapter); end-to-end repo
round-trip still needs a live box before being relied on.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The borg/restic/kopia engines all dropped to the dedicated backup user
via scattered 'sudo -E -u $docker_install_user'. Centralize that into a
single runBackupOp helper so the backup subsystem has one audit point and
the scoped sudoers needs only the (dockerinstall) drop rule.
Also:
- owncloud config heredoc tees -> runSystem (container-UID file)
- webui_display_logins: fix the broken 'command -v sudo sqlite3' guard
to 'command -v sqlite3' (body already runs sqlite3 via runInstallOp)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The backup engine already drops to the backup user (sudo -E -u
$docker_install_user) and backupLocationOwner == $docker_install_user, which is
exactly what runFileOp/runFileWrite resolve to in both modes. So convert the
raw-sudo data ops (mkdir/chmod/rm/find/cat/grep/mv/chown/tee on backup repos,
location configs, keys, manifests) to runFileOp/runFileWrite — creating files
as the owner directly, no root chown. backup_verify creates its scratch as the
backup user (runFileOp mktemp) instead of chown-after. Binary installs
(kopia tar/install, borg dnf) -> runSystem. The 44 sudo -u engine drops stay
(already least-privilege; the scoped sudoers will grant them).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
A free, open, self-hosted app platform (GNU AGPLv3): one-click app deploys,
Traefik reverse proxy with automatic SSL, rootless Docker support, gluetun
VPN routing, and a web dashboard to manage it all.
Free & open forever to self-host; optional paid hosted services fund it.
See PROMISE.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
