Drop the GitHub-release version comparison entirely. We install slirp4netns
from apt regardless, so comparing against the GitHub-latest tag only produced
a perpetual 'outdated' loop and a no-op re-install. apt-get install -y is
already idempotent, so run it unconditionally and report the resulting
version.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
slirp4netns --version prints multiple lines (version, commit, libslirp,
SLIRP_CONFIG_VERSION_MAX). The old 'awk {print $2}' ran on every line and
also picked the literal word 'version' from line 1, producing a multi-line
blob that leaked into the 'is outdated' notice. Read only the first line and
take field 3 (the actual number), strip the leading v from the GitHub tag so
the comparison is meaningful, and skip the check if the tag fetch fails.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Initial rootless setup ran 'systemctl --user start docker' immediately
after install, but the rootless net/port-driver override.conf (and the
daemon-reload that loads it) aren't written until further down. So the
first start always failed — 'Job for docker.service failed' plus a
spurious '✗ Error Setting up Rootless' in the error report — even though
the later 'systemctl --user restart docker' brought the daemon up fine
once the override was in place.
Drop the premature start from the install step (keep install + enable);
the restart after the override is written is now the first real start.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The 'Installing System Requirements' step ran apt-get install with no
output until checkSuccess reported afterwards, so it looked frozen
while packages were being fetched. Print a notice up front.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
'local result=$(cmd)' resets $? to 0 (the local builtin's own exit), so the
following checkSuccess always saw success regardless of cmd's real exit — the
mechanism that masked the de-sudo write failures. Split declaration from
assignment ('local result; result=$(cmd)') across all 235 active-code sites
(84 files) so the command's exit reaches checkSuccess. No behaviour change
beyond $? now being accurate (no set -e in runtime code; multi-line
assignments transform safely).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The Debian-shipped passt AppArmor profile (/etc/apparmor.d/usr.bin.passt)
denies the accesses pasta needs to plumb rootlesskit's netns:
- ptrace_read on the rootlesskit child to enter its user namespace
- read /run/user/<uid>/dockerd-rootless/netns (the netns file)
- read /proc/<pid>/net/{tcp,tcp6,udp,udp6} for implicit port forwarding
Without these the rootless docker daemon fails with:
pasta failed with exit code 1:
Couldn't open user namespace /proc/<pid>/ns/user: Permission denied
scripts/docker/install/rootless/rootless_apparmor.sh:
New installRootlessApparmorForPasta() — idempotent fixup.
1. Adds `include if exists <local/usr.bin.passt>` to the main profile
(one line; re-adding is a no-op via grep).
2. Writes /etc/apparmor.d/local/usr.bin.passt with the four rules
pasta needs. The /local/ pattern is the standard Debian AppArmor
hook for site-managed overrides — survives `apt upgrade passt`
because it's outside the package's managed paths.
3. Reloads via apparmor_parser -r.
Called from installDockerRootless after the override.conf write, gated
on $rootless_net == pasta. slirp4netns installs skip it.
This box was already manually patched while debugging the pasta swap —
the installer-side change makes it idempotent across reinstalls and
applies the same fix on any other host that installs rootless docker
with pasta as the net driver.
Signed-off-by: librelad <librelad@digitalangels.vip>
Reverts the 2>/dev/null band-aids and fixes the root cause. The
manager-run install boot scans app configs under /docker/containers AS
the container user (runFileOp). But init.sh's initFolders creates that
dir manager-owned, and the handover to the container user happened later
(start_preinstall), AFTER the boot scans — so the scans ran as the
container user against a dir it didn't own yet: "find:
'/docker/containers/': Permission denied" (cosmetic; the dir is empty
that early, but it's the wrong ownership at the wrong time).
Add initContainerLayer() to init.sh's root phase (after initGIT +
initUpdateConfigs, before the manager-run handoff): rootless-only, it
creates the docker-install user if missing and chowns /docker/containers
to it (751). The later rootless setup is now idempotent — it finds the
user existing and just (re)asserts its password + daemon config (moved
updateDockerInstallPassword out of the create-only branch). Rooted is
unaffected (containers stay manager-owned, which the manager reads).
Result: by the time the boot scans run, /docker/containers is owned by
the user doing the scanning — no permission error, nothing suppressed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
On a fresh install the requirement checks run before the things they
probe exist, leaking raw command stderr:
- check_install_type.sh: `$( (id -u "$user") )` printed
"id: 'dockerinstall': no such user" to the terminal AND — since id's
error goes to stderr, not the captured stdout — the next line's
`[[ "$ISUSER" == *"no such user"* ]]` could never match, so the
rootless-user-absent branch was dead. Add `2>&1` (matching siblings on
lines 25/31): no leak, and the check now works.
- grep on $sysctl (the rootless marker conf, absent until rootless is set
up) printed "grep: /etc/sysctl.d/99-libreportal-rootless.conf: No such
file or directory". Add -s to the four $sysctl greps
(check_docker_rootless, rootless_start_setup, rootless_docker x2);
"marker absent" is still detected (non-zero exit), just without the
file-not-found message.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The scoped sudoers grants the manager (root) and (dockerinstall) but NOT
(itself), so the many 'sudo -u $sudo_user_name <cmd>' calls (crontab,
git/update, reinstall, swapfile, …) failed with 'a password is required'
once per CLI command. runAsManager runs the command plainly when already
the manager (the runtime case) and only sudo -u's when root (install
time), so it's correct in both contexts and needs no sudoers self-grant.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Foundation for a scoped sudoers: route every genuine system-admin command
(systemctl/ufw/ufw-docker/nft/apt/apt-get/pacman/sysctl/useradd/usermod/
service/wg/wg-quick/cscli/loginctl) through runSystem instead of raw sudo
across 28 active scripts. runSystem is 'sudo "$@"' so this is byte-identical
in every mode (safe on live installs) — it just collects all real-root use at
one chokepoint that will define the eventual /etc/sudoers.d allowlist.
Also: revert a crowdsec advice message the sweep wrongly rewrote (the admin
types sudo, not runSystem), and give crontab_check_processor.sh the same
startup bootstrap as the task processor — it runs standalone via cron and
already used runFileOp/runFileWrite (undefined there), so it was silently
broken; now it sources the helpers + docker-type config.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The 'Update the .bashrc file' step printed its header but, when the rootless
block was already present, the if-guard skipped the whole body with no output
— looked like nothing happened. Add an else that notes it's already configured.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Disabling userland-proxy makes rootless dockerd require br_netfilter
(/proc/sys/net/bridge/bridge-nf-call-iptables), absent in the rootless
netns on Debian -> default bridge creation fails -> daemon won't start.
Drop the daemon.json userland-proxy=false write. Source-IP is preserved
at L7 by Traefik (X-Forwarded-For), so no real loss.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Reinstall test on Debian 12 surfaced three rootless-only breakages (rooted
was byte-identical/fine):
1. pasta blocked by Debian's passt AppArmor profile (DENIED ptrace read ->
can't open container netns -> rootless dockerd never starts). Default
CFG_ROOTLESS_NET back to slirp4netns (reliable); pasta stays selectable
for hosts that relax the profile.
2. de-sudo mis-assigned helpers by owner. /docker management layer (apps DB
chowned to libreportal by install_sqlite, /docker/logs) is MANAGER-owned,
not dockerinstall. Add runInstallWrite; move apps-DB sqlite3 -> runInstallOp
and /docker/logs appends -> runInstallWrite. Revert ownership-SETUP scripts
(libreportal_folders, app_folder) to runSystem — they must run as root to
establish ownership during install. Container files (/docker/containers/<app>)
stay runFileOp.
3. kernel hardening sysctls written to /etc/sysctl/99-custom.conf, which
'sysctl --system' does not read -> never applied. Write them to
/etc/sysctl.d/99-libreportal-hardening.conf instead.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Enabling unprivileged user namespaces for rootless widens the kernel
attack surface reachable by unprivileged users (a known source of LPE
CVEs). Pair it with three distro-portable, low-impact sysctls that close
the surfaces those exploit chains rely on: kernel.kptr_restrict=2 (hide
kernel pointers), kernel.yama.ptrace_scope=1 (block cross-process
ptrace), net.core.bpf_jit_harden=2 (harden the JIT). Added as a separate
guarded LIBREPORTAL KERNEL HARDENING block so it's clearly deliberate and
independently idempotent.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
Switch the rootless network stack from slirp4netns+builtin to pasta+
implicit (faster and propagates the real client source IP). The earlier
pasta+builtin attempt bricked the daemon because rootlesskit rejects
mismatched net/port-driver pairs; expose a single CFG_ROOTLESS_NET knob
(pasta default, slirp4netns fallback) and derive the matching port
driver in-script so an invalid combo can't be configured. Disable
userland-proxy in the rootless daemon.json (merged, not clobbered) so
containers see the real source IP. Both driver binaries are always
installed, so switching is a config flip + rootless re-setup.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
The rootless dockerd override forced NET=pasta + PORT_DRIVER=builtin, which
rootlesskit rejects ('pasta requires port driver none or implicit'), so the
daemon failed to start every time (the real cause behind 'rootless socket not
found'). Use slirp4netns + builtin (valid, still skips the userspace
port-handler). Verified: daemon now comes up, docker Server 29.5.2 responds.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
useradd was missing its login-name argument (and -m), so it failed — silently,
because local result=$(...) swallowed the exit code and checkSuccess reported
success. The rootless install user was therefore never created, which cascaded
into 'invalid user dockerinstall' and a daemon that never came up. Pass the
username + -m (subordinate uid/gid ranges come from login.defs), unmasked.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
A free, open, self-hosted app platform (GNU AGPLv3): one-click app deploys,
Traefik reverse proxy with automatic SSL, rootless Docker support, gluetun
VPN routing, and a web dashboard to manage it all.
Free & open forever to self-host; optional paid hosted services fund it.
See PROMISE.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Signed-off-by: librelad <librelad@digitalangels.vip>
